Tuesday, November 23, 2010

Green Xmas





Supplies:
tube of choice i used one by elias
which can be purchased at MPT
Kit of choice i used Sugar Cookies from Juicy Bits
Mask of choice i used 124 from Here
Do not use the same tube i did unless
you have purchased it and have a license to do so

Ready?
Open a 600x600 image
selections select all, paste paper of choice into selection
deselect, apply mask, merge group.
new raster layer, select all repeat above step with different paper
then rotate right 40
paste frame of choice, if using same kit, resize frame 80%
select inside of frame with magice wand feather 0
expand 3-invert an paste paper of choice-delect select none
move paper below frame layer.
now paste tube of choice or close up on top of frame layer
resize an line it up where you want it, then using your freehand
tool draw around the tube part from the inside bottom of the frame
an below then hit delete, place tube so the bottom looks like its inside
the frame. now paste 2 flowers of choice resize 1 by 70% 2x an the other 70% 1x arrange slightly behind left side of frame, see tag for placement,
merge flower layers, duplicate-mirror.
paste bow of choice, resize place over center of the flowers but over the frame. duplicate-mirrior.
add any other elements of choice, merge tag, resize 80% 1x
add credits, text, etc. an you done.
written by crazykittie
11/22/2010

Tuesday, November 9, 2010

You Talkin To Me?




Supplies:
Kit of choice
i used The Traveler by Juicy Bits
Tube of choice i used angela newman
which can be purchased at MPT
Ready?
Open a 600x600 image
open frame of choice, the one i used i did not resize
grab your magic wand>feather 0, select the inside
of your frame be sure you select all open areas
invert, paste paper of choice hit delete, move below
frame layer, go back to your frame layer, paste tube of choice
hit delete, move this below frame layer, paste ribbon of choice
resize as needed move to bottom, paste a 2nd ribbon
do the same for it, now duplicate both ribbons, merge the
copy an image mirror.
paste leaf from kit, below ribbon layers resize duplicate, mirror
paste 2 flowers of choice, resize as needed an place both
on right side of frame close to the top.
paste another ribbon of choice place this one at bottom
of frame, resize as needed.
copy breifcase of choice resize as needed, paste hat from kit
resize an paste on the left of the case, grab your eraser
shape round, size 5, erase part of the hat so it looks like
its balanced on the case. paste books from the kit, resize
place slightly over the case, copy metal flower an paste on the right
resize as needed. add any other elements of choice
merge visible, resize tag by 80% add any credits an text
save an your done!
written by crazykittie
11/9/2010

Saturday, October 30, 2010

Let's Go Skating





Supplies:
Kit of choice
I used snow day by Kristi W.
available at Scrappin Divaz
Tube of choice
I use elements from the kit.
no outside filters required.
resize settings i used: 30% 1x & 80% 1x bicubic
so when i mention resize you will know what to do.

Ready?
Open a new 650x650 image
copy n paste frame from kit, resize
using magic wand w/feather set at 3 select the inside
the frame, paste paper of choice, selections invert hit delete
selections none move below frame. copy n paste snow day word art from kit resize an place toward the top of the paper once happy with placement add drop shadow of choice.
copy ice rink from the kit, resize an place toward bottom
copy character from kit or tube, resize an place on the ice rink
add drop shadow. copy bow of choice resize an place at top
left of frame, add dropshadow.
copy sign from kit resize, place on left side of the frame,
copy hat an mitten resize an place at bottom of sign post
use deform tool to tilt the hat to the left a little.
copy an paste mitten string from the kit, resize an place
at top right of the frame, copy button of choice, resize
an place on top right of frame so that the mittens look
like they are hanging from the button.
copy n paste sled, resize, place on right side of frame
copy snow balls, resize, place at bottom of sled
copy sign button of choice, resize an place in front of
snow balls. add any other elements of choice, dropshadows
an such. merge all visible, resize tag by 80% 1x add credits,text
an save.

written by crazykittie
10/30/2010

Tuesday, October 26, 2010

Autumn Love










Supplies:
Tube,scrap kit & mask of choice
Tube: UVD purchased from MPT
Mask 17 from: weescotslasscreations
Scrap Kit Soleil d' Automne: Juicy Bits

Ready?
Open a new 600x600 image
copy n paste paper of choice-apply mask-merge group
add/remove noise-uniform-monochrome-40%
paste 2nd paper of choice-apply same mask-merge group
lower opacity to 75%.
copy n paste round frame rotate it using defrom tool until the
deco is at the top. copy an paste tube of choice, resize as needed
highlight frame layer
using magic wand select outside the frame layer
go back to tube layer an hit delete.
copy n paste leaf-resize 90% 1x rotate left 90%
duplicate-image mirror-merge down add dropshadow of choice
copy n paste yellow ribbon resize as needed move below leaf layer
copy n paste flower of choice resize 80% 1x place on top middle of leaf layer. copy n paste 2nd flower of choice reszie smaller then first one
add dropshadow of choice, move below the first flower an slightly to the left, add dropshadow, duplicate-mirror. merge all visible
resize tag-add credits,text ect.. an save as png or jpeg an your done
written by crazykittie
10/26/2010

Thankfull





Supplies:
Tube of choice
i'm using one by ray leaning which
can be purchased from MPT
scrap kit of choice, i used giving thanks by carita
which can also be purchased at mpt
mask of choice, i used the 20/20 mask

Ready?
Open a new 600x600 image
new raster layer-select all -paste paper of choice
into the selection-select none.
apply mask-merge group,
adjust-add/remove noise-uniform-monochrome-60%
new layer-paste another paper of choice into selection
select none- apply same mask-merge group-lower opacity to
80%
copy n paste round frame or frame of choice
resize 80% 1x or to your liking, grab your magic wand
feather set at 4 select inside the frames-selections invert
paste paper of choice hit delete move below frame layer
leave selected an paste tube of choice in left side, resize
before hitting delete, go back to your main tube-image mirror-
paste in other frame-when you have it where u want it, hit delete
selections none. copy n paste flowers from the kit place at middle
top of the 2 frames, resize as needed, add dropshadow of choice.
copy n paste mesh from the kit, rotate it using the deform tool,
resize as needed, copy n paste ribbon of choice from the kit
resize till its same size as the mesh. copy n paste tendril-image rotate
90% left-using deform tool line it up with the ribbon and mesh,
image duplicate-mirror-merge these 2 layers together and add dropshadow of choice. add any other elements of choice-merge visible
resize tag by 80% 1x, add any choice of text or word art, credit info
save as png an your done!
written by crazykittie
10/26/2010

Wednesday, October 6, 2010

Sexy Witch


Supplies:
tube of choice, i used one by Celine
which can be purchased at mypsptubes.com
kit of choice, used All Hallow's Eve by
juicy bits, myjuicybits.blogspot.com
mask of choice i used wsl-mask127
by weescotslass.blogspot.com

Ready?
Open a new 600x600 image
copy n paste paper of choice
layers-new mask layer-select mask from dropdown
an apply-merge group, adjust-blur-gausion blur-radius 8
add/remove noise-add noise-gausion-monochrome checked
at 30%.
copy n paste 2nd paper of choice apply same mask merge group
image-rotate right-30 apply blur same as before, apply noise
change to 40%
now copy n paste frame of choice-grab magic wand, with feather
set at 6 select inside the frame-selections invert, copy n paste paper
of choice-hit delete-selections none.
with the paper layer selected grab your magic wand again an click
anywhere on your canvas, paste your tube, once you have it where
you want it, hit delete.
close off visibilty on your mask layers an merge visible all other layers
now resize your frame 75% 2x's. duplicate your frame layer 2x's
image rotate left 30%, then repeat for 2nd frame copy but change
rotate to right 30%. now copy n paste ribbon of choice, resize 75%
2x's move below frame layers an line up with the middle.
copy n paste 2nd ribbon of choice use same resize.
using deform tool, menuver so it looks like my tag an send to bottom
of frames layer, add drop shadow of choice, duplicate-mirror.
copy n paste bow of choice resize 2x's by 75% an place at top of frame.
copy n paste bats resize 1x by 75% place at top left corner of frame
but not top of your frame. duplicate-mirror see tag for placement.
copy n paste pumpkin of choice resize 1x 75% an place behind frame
layer but in front of ribbons. add any other elements of choice
resize tag by pixels 510x510, add your credit info, text. save as
png an your done!

written by crazykittie
10/6/2010



Friday, September 24, 2010

Sweet Love





Supplies:
Tube of choice, i used Shawli
which can be purchased from www.mypsptubes.com
Kit of choice, i use sweet pea by juicy bits
www.myjuicybits.blogspot.com

Ready?
Open a new 600x600 image, copy n paste round frame
from the kit or frame of choice, resize 1x 85%
grab your magic wand select the inside of the frame
selections-modify-expand5-invert
copy n paste your tube of choice or close up
hit delete,selections none.
copy n paste ribbon of choice from the kit, place behind the frame
add drop shadow, duplicate-mirror, see tag for placement.
copy n paste a bow that matches the ribbons resize as needed
an place at top of frame so that it covers the space between the ribbons.
copy n paste bead string, resize as needed an place on left side
of frame. copy n paste any other elements of choice.
resize, all layers checked by 85% add your credits, any text
save as png or jpeg and your done!

written by crazykittie
9/23/2010

Thursday, September 16, 2010

Virgo


Supplies:
tube of choice
I used virgo by Nicolas Rivet
which can be purchased at www.mypsptubes.com
Scrap of choice
i used a ptu, virgo by ruth's designs
www.scrapindaisy.blogspot.com

Ready?
Open a 600x600 image
copy an paste frame of choice, resize as needed.
grab your magic wand select inside of frame, modify
expand 5 invert, copy n paste paper of choice.
select none, move paper below frame layer.
if your using same tube as me, resize as needed
and place where it looks like she is standing on bottom
of frame. copy element of choice from kit, i used 36
resize an place at top left of frame, copy bow of choice,
i used element 6. resize, image flip an place at top of element
36. copy element 67 from the kit, resize 85% 2x an place at
bottom right of frame, using deform tool turn it to the left a little.
copy element 70 from the kit, resize 85% 2x an place on right
of element 67.
copy 2 flowers of choice from kit, resize as needed an place on
bottom left of frame.
remember to add drop shadow of choice to all elements if you want.
merge visiable, resize by 85% 1x all layers checked or to size of your liking. add all credits, add your text an your done.

written by crazykittie
9/16/2010





Tuesday, August 10, 2010

Best Friends




Supplies:
Scrap kit or tube of choice
all tag elements from Best Friends Kit
by Carita which can be purchased at www.mypsptubes.com
Mask,dog food n water Here
if the mask was made by you please let me know
so i can credit you.

Ready?

Open a new 600x600 image, copy n paste doghouse of choice
resize by 80% 1x place in center an move to the left,
paste fence resize 80% move below house layer an place
behind the house slightly, duplicate-mirror.
copy n paste grass resize so that it fits the fence
place on left side of house duplicate 3x place along
the fence on right side, paste petunia resize 70% 2 or 3 x
an place on left side of fence erase bottom stem an bloom.
duplicate-mirror. paste award from the kit, resize so that
it fits on left of house just under roof line.
copy n paste dogs or tubes of choice resize slightly an place
where you want them. copy n paste bone resize 70% 2x paste
ball resize 70% 3x place next to dog or where your happy with
it. copy n paste dog bowls, resize both by 70% 3x an place
water n food from supplies over the bowls.
now open the mask in psp if you havent already an minimize,
copy n paste 2 papers of choice on the bottom, layers-mask from image
find your mask in the drop down, invert transparency, source luminance
checked, apply merge group, do the same for your other paper, if you used
blue an green, arrange them so they look like sky n grass.
place any other elements of choice, merge visiable add artist info,
your text. resize all layers by 85% save as png an your done.

written by crazykittie
8/10/2010

Puppy Love



Supplies:
Tube of choice, I used legends art
which can be purchased at www.mypsptubes.com
kit of choice, I used Best Friends by Carita
Which can be also can be purchased at MPt

Ready?
Open a new 600x600 image, copy n paste tag of choice
i used tag 2, copy n paste framecluster, using your magic
wand select the inside of both frames, expand 3 invert,
paste paper of choice, delete leave selected an move paper
below frame layer copy n paste tube of choice i resized 70% 2x
paste in to left side of frame once you have it where you want it
hit delete, now go back to original copy, mirror paste into right
side of frame again resize 70% 2x.

merge down tube,frame an paper layers
copy n paste plant 2 resize once by 70%

place on right corner of frame
an move below frame an above tag add dropshadow,

duplicate mirror an place
copy on left side of frame, see tag for placement

copy n paste petunia from
the kit, resize 70% 2 or 3x place behind frame an line up with center
erase any stem sticking out.

copy n paste blue bow, resize 70% place on
left corner of frame, add dropshadow.

copy n paste green bow, resize 70%
an place on left corner of frame on the right add dropshadow.
copy n paste flower 1 resize 70% an place center on bottom of frame
add dropshadow,

paste flower 2 resize an place on left side of first
flower move below it, add dropshadow, duplicate-mirror
paste tube resize as needed add dropshadow, merge all visiable.
add credits info, your text. using your crop tool, crop around your
tag to rid the extra space, resize all layers by 85% save as png an your done.

written by crazykittie
8/10/2010

Monday, August 9, 2010

Let's Go Out



Supplies:
Tube of choice, I used Jose Cano
Which can purchased at www.mypsptubes.com
Kit of choice I used Blush by Ruth's designs
which can also be purchased at mpt.


Ready?
Open a new 600x600 image copy n paste doodle of choice
from the kit add dropshadow, duplicate-mirror-flip an place
both so that they just barley touch the edge of your canvas merge down.
now copy n paste frame of choice grab magic wand an select the inside
of the frame-selections modify-expand 5-invert,
paste paper of choice
delete move down,

paste a close up of your tube if available resize by 90%
more if needed, delete-select none,

move this layer down, lower the opacity
on your tube layer to around 65 or 70,
close off doodles layer an bottom layer
merge visiable an resize your frame by 80% 2x

duplicate on your bottom
copy image rotate left 25 go back to your top copy
copy n paste element 75 resize
80% 1x place on left corner of frame, c
opy n paste butterfly of choice resize as
needed an place on top of the other element you just place.
copy n paste glass heart
of choice rotate left 25, resize 80% 1x

an place so top link touches top corner of frame
on the right, paste small bow of choice

resize by 85% 2 or 3x rotate left 25 an place at
top of heart.
copy n paste element 50 place at bottom of frame,

using deform push the sides
in so it lines up with the frame edges.
copy n paste element 38 select the insides of
both frames an expand 4 invert,paste paper of choice delete,
paste your tube an line the face up in the heart, delete
now go back to your original tube copy mirror,

paste into other heart an line up same way
as first delete select none.move paper an tube layers below frame
merge both tube layers an lower the opacity to around 55 or so
merge tube layer with paper layer then merge

with frame layer an resize around 80 or 85%
2 or 3 x place between ribbon an heart layers,
add dropshadow of choice.
copy n paste compact resize 80% 2x image mirror place on left side,
copy n paste lipstick
of choice resize 80% 1x an place next to compact.
add full size of your tube merge all
layers visiable, image canvas size an resize your tag to 495x495
add artist info, your text
save as png an your done.


writtin by Crazykittie
8/9/2010

2Hot2Handle




Supplies:
Tube of choice
I used one from juicy bits
http://www.myjuicybits.blogspot.com/

kit of choice i used Aflame
by sylvie http://fantasymoments-scraps.blogspot.com/
Mask of choice i used one from Babes Designz
http://babesdesignz.blogspot.com/



Ready?
Open a new 800x800 image
paste paper of choice from kit, layers-new mask layer from
image, apply, you may have to invert transparency depending
on what mask you use, merge group, adjust,add/remove noise add noise
of choice. copy frame of choice
from the kit, place in center of canvas, grab magic
wand select the inside of the frame selections-modify-expand 5
selections invert.
copy n paste paper of choice hit delete move
below frame layer, leave selected copy n paste tube-hit delete,
selections-none, move below frame layer,
paste your tube again
now, line it up with the first copy of your tube, an grab your
lasso an select the parts that is hanging over the frame. merge
this layer down to your frame layer, then merge visiable resize
by 85% all layers unchecked.
copy n paste a flower of choice i used
element 22 don't resize an place at right corner an move behind the frame
place it so only half is sticking out, see tag for placement
now copy n paste
a second flower of choice, resize so that it is slightly smaller then the first
one, place at top of tag just under the other flower, duplicate-mirror place copy
on side of the frame an slightly under the first one, see tag.
copy n paste butterfly of choice resize so that it just covers the bow
the bow one right top corner of the frame.
now copy n paste a bow of choice
resize as needed an place on left corner of frame, see tag for place ment
copy n paste element 38 or other flower of choice, resize as needed, place
on left bottom of frame move so that it doesnt cover your tube up.
erase the stems,
now copy n paste element 69 or other of choice, resize as needed
an place behind the other flower so that it sticks out slightly, erase the stems.
now add any other elments of choice, go back add drop shadows to all elements.
artist info, your text save as png an your done.

written by crazykittie
8/9/2010

Saturday, August 7, 2010

Hot Pants




Supplies:
Tube of choice
I used Robert Alvarado which can be purchased at mypsptubes.com
you will need a close up and full size tube
Kit of choice I use Exite from juicy bits, thank you so much
for a wonderful kit i had fun with it. it can be purchased at
www.myjuicybits.blogspot.com
Mask of choice I used DBV Mask 81 whick you can find at
http://designsbyvaybs.blogspot.com/2010/03/masks-79-90.html
Font of choice I used Rockwell
Optional filter effect, eyecandy5 impact gradient glow
dropshadow of choice to all elements

Ready?
Open a new 800by800 image copy n paste paper of choice
i used paper 15 layers-new mask layer from image-select
your mask from the dropdown source luminance checked
everything else unchecked. merge group.
copy frame of choice from the kit i used frame 2
image rotate-free rotate-left 90 now grab your magic
wand click inside the frame selections-modify-expand 5
selections invert, paste paper of choice from the kit
hit delete move below the frame layer leave selected
now making sure your on the frame layer, paste close
up of your tube, hit delete move below frame layer deselect.
close of your mask an bottom blank layer an merge visible
now resize your merged layer 85% 1x copy an paste star element of
choice from the kit i did not resize this but suit yourself lol
move to the top left of the frame move below frame see tag for placement
copy n paste ribbon 3 from the kit place at bottom of frame
copy n paste ribbon 2 from the kit image-rotate-left 90 place
on right side of frame copy n paste the butterflies element
place at bottom right of frame, copy n paste butterfly 1 from the kit
resize 80% 1x an place at top right of frame an move over just a little
using your deform tool turn it slight to the left. copy an paste butterfly
3 from the kit place on left side of frame about middle ways, an resize 80%
1x grab the defrom tool an turn it slightly to the right. see tag for placement
copy n paste bow of choice from kit i used bow 4 resize 80% 1x or more if you choose
place on left end of the pink ribbon. copy n paste word art of choice an place to
the bottom left. now add your full size tube resize if needed add dropshadow,
making sure you have added a dropshadow to all elements-merge visible
then image-resize-500 pixels. add artist info an your text, now on your text layer
if you choose to do so, eyecandy impact-gradient glow with the settings below.
on the setting tab use subtle white glow, on the basic tab-outside glow-mask selection checked
glow radius-6.95 soften corners 25 overall opacity 100 distortion 0 distortion lump 100
gradient smoothness 100-apply
save and your done.
written by crazykittie
8/7/2010

Friday, August 6, 2010

Summer Blooms



Supplies:
Tube of choice
i used shawli which can be purchased at www.mypsptubes.com
kit of choice, i used summer bundle by carita which
also can be purchased at mypsptubes
thank you muches for letting me tut your kit.
mask of choice i used 115 from weescotslasscreations.blogspot.com

Ready?
Open a 600x600 new image again so you have room to work.
copy n paste paper of choice-layers-new mask layer
find your mask in the drop down source luminace checked
everything else unchecked apply mask-merge group
adjust motion blur with the following settings
Angle 30.00 strength 65% apply, adjust-add/remove noise-add noise
uniform-monochrome-30% apply,

copy n paste doodle of choice
place where the left side almost reaches the top of your work space
duplicate-mirror-flip

copy n paste frame of choice grab your magic
wand an select the inside, if you use one with the staples be sure
to select the space behind them also-selections-modify-expand 5
selections-invert.

copy n paste paper of choice hit delete
move below frame layer, going back to your frame layer, copy n paste
ac close of your tube, resize if needed again hit delete, move this
below the frame.

copy n paste tag of choice resize by 75% once
place on top right corner of frame, line top of tag up with the frame
use eraser tool an erase the string,add dropshadow and text of choice
add bow of choice resize as needed.add dropshadow.

copy n paste
a full size copy of your tube, resize by 80% or size of your choosing
place on left side of frame.

copy n paste leaf of choice from the kit
resize by 75% once-image rotate left 90,add dropshadow place at bottom of
frame,duplicate-mirror, grab 2 flowers of choice from kit copy n paste 1
resize 80% once place on the left be sure not to cover the leaf completely
see tag-paste 2nd flower of choice resize 80% once place next to first flower
an move below it.

go back to first flower duplicate-mirror an line it up on
the right same as you did the left one. merge all 3 flowers add dropshadow of choice
copy n paste the stem from the kit resize either by 80% 3x or 70% 1x your choice
place behind flowers but in front of the leaf erase any stem sticking out at the
bottom, add dropshadow duplicate mirror line up on right same as you did on the left.
merge all layers visible, resize all layers by 80% 1x add artist info, your text
and your done.
written by Crazykittie
8/6/2010

Rock Me




Supplies:
Tube of choice, I used one by Ismael Rac
which can be purchased at www.xeracx.net
Scrapkit of choice, i used Rock me like a hurricane
by Carita, can be purchased at www.mypsptubes.com
no outside filters or plugins used.

Ready?
Open a new 600x600 image so you have room to work
copy n paste frame 2 from the kit an place it center
of your work space. no resizing needed. grab your
magic wand an click inside the frame, selections-modify-
expand-7 selections-invert, copy n paste paper of choice
from the kit, delete, move below frame, leave selected.
making sure your on your frame layer, copy n paste close up
of your tube, hit delete then move below frame layer-deselect.
copy n paste the ribbon from the kit place on the left side
an once you have it where you want it, erase a part that is
on the frame to make it look like its wrapped on the frame
grab bow from the kit resize 80% once an place on top of the ribbon
where you erased it. add dropshadow of choice to bow an the ribbon
copy n paste a cap of choice from the kit, i used cap 2 resize by
80% 2x's an place on right side of frame at the bottom.
copy n paste guitar of choice an place on right side of frame
below the cap.add dropshadow of choice to both
add any other elements of choice, resize tag 80% once
then add artist info, your text an your done.

Written by Crazykittie
8/6/2010

Thursday, August 5, 2010

Blue Fairy




Supplies:
tube of choice
I used Rachael Tallamy
which can be purchased at
www.upyourart.com
Scrap kit of choice
i use Genea's Notebook by Carita
can be purchased at www.mypsptubes.com
Masks-106 & 347 from weescotslasscreations.blogpost.com

Ready?
Open a new 600x600 image copy n paste tagback 2 from the kit
add dropshadow of choice, now add paper of choice
paste on new layer above the tag back.
layers-mask layer-find 106 in the drop down an apply.
delete mask an merge group.lower the opacity to around 35 or 40
copy n paste notebook 1 from the kit
resize to your liking an rotate 35 left.
copy n past paper of choice i used paper 8
layers-mask layer-find mask 347 from the drop down
apply- merge group. rotate 35 left an resize 75% 2x's
place over the notebook, doesn't have to be percect.
copy n paste the key from the kit resize 75% 1x
place on top right corner of the notebook.
copy n paste your tube, resize as needed add dropshadow of choice
paste flower1 from the kit resize 75% then again at 80%
drop shadow of choice, duplicate-mirror
copy 2 from the kit resize 75% 2x's an place next to the one
on the left see tag for placement, dropshadow-duplicate
and move to the right. copy bow 3 from the kit resize 80% 1x
and place on top of the flowers in the middle.
copy leaf 2 from the kit an paste as new layer-duplicate
then move over to the left a little merge down, add dropshadow
duplicate mirror move to the left a little then merge down
send to bottom. add artist info, your text an your done.

writtin by Crazykittie
8/5/2010
tag originaly made March/2010

FaeFae




Supplies:
Tube of choice
I used one from Barbara Jensen
which can be purchased at
www.eroticartistgallery.com
Kit of choice, I use Antigone
From Juicy bits http://myjuicybits.blogspot.com
Mask 258 from weescotslasscreations.blogspot.com

Ok Ready?

Open 600x600 image so you have room to work
copy n paste paper of choice from kit
layers-mask find your mask of choice in the dropdown
apply- delete mask-merge group.
adjust blur-motion blur with the settings below
angle 30.00 strength 65%
add noise-uniform-monochrome-30%
copy n paste doodle or element of choice
resize by 80% once move toward bottom a little
duplicate-image mirror-flip, copy n paste frame of choice
resize as needed, grab magic wand, select inside of frame
selections-modify-expand 7-invert, copy n paste paper of
choice-hit delete move paper below frame, leave selected
going back to frame layer
paste tube of choice resize as needed an hit delete
select none. copy n paste ribbon of choice,
image-rotate-free rotate left 90, resize so that it
lines up with top an bottom edges of frame.
add bow of choice resize as needed an place at bottom
of ribbon add drop shadow of choice, add other elements
of choice, artist info, text. resize tag by 80% once
an save.

written by crazykittie
8/5/2010

Sunday, August 1, 2010

Summer Hottie

Supplies:
Tube of choice
I used Ismael Rac
which can be purchased
at www.xeracx.net
Kit of choice one i used
is a fabulous freebie
from http://fantasymoments-scraps.blogspot.com/
called Innocent. thank you sylvie!
no outside plugins or filters used.

got everything?
Let's go

open a 600x600 image copy n paste element 76
from the kit, resize as needed
grab your magic wand an click inside both frames
selections-modify-expand 4 selections invert
copy n paste paper of choice i used paper 11
hit delete move below frame layer.
selections none-copy n paste your tube, resize
as needed place over the right side of the frame
so that is hanging over just a bit on the top an
left side, carefuly erase anything over hanging on the
right an bottom of the frame. duplicate-mirror place
copy in left frame so it matches the one on the right.
copy n paste element 32 resize as needed an place on right
side of frame and just behind your tube duplicate-mirror
see tag for placement. copy n paste element 51 resize as needed
place on right bottom corner of frame over the stem, duplicate-mirror
erase any stem showing behind the bow.
copy n paste element 56 resize as needed place on lower middle of frame
and to the right.
copy n paste element 57 resize as needed place on lower middle of frame
an to the left.
choose 2 colors from your tag an add the text summer hottie or text of choice
to the lower right of the tag add drop shadow of choice.
grab your crop tool crop your tag but leave at least 3 rows below the text
you just added. now resize tag to your liking, add artist info.
now for your name, add name place where your happy add drop shadow of choice
adjust-add/remove noise-add noise uniform-23% monochrome, save an your done.

written by crazykittie
8/1/2010


Calendar Girl

Supplies:
Tube of choice
I use Jamie Kidd
which can be purchased
at www.cilm.com
Kit of choice
I use calendar girl
from juicy bits
www.myjuicybits.blogspot.com
Filter: eyecandy gradient glow
Ready?
Open a new 600x600 image
copy n paste glitter 1 from the kit
pull it down an to the right just a little
duplicate-mirror-flip
copy n paste flourish 2 from the kit
resize by 85% percent move to the right
just a little, duplicate-mirror
copy n paste frame 2 resize as needed
grab your majic wand an click inside the frame
selections-modify-expand 7 selections invert
copy n paste paper of choice from the kit
i used paper 6 hit delete move below frame layer
making sure your on the frame layer, paste
close up of your tube once you have it to your liking
hit delete move this below the frame layer-selections none
copy n paste the fan from the kit, resize as needed
and place on bottom right corner of frame,
grab your eraser an remove the strings on the fan.
copy n paste flower 4 from the kit, resize as needed
and place over the fan, see tag for placement.
copy n paste the floral tag from the kit resize as needed
an place on upper left corner of frame, using deform tool
turn it to the left a little. grab your text tool an place
text of choice on the tag.
copy n paste full size version of your tube resize by 90%
add drop shadow of choice. now resize tag to your liking
and add artist info an your text of choice
on your text layer add drop shadow of choice
then eyecandy gradient glow at the settings below
Basic settings:
color: choose one from your tag
glow width: 12.79
soft corners: 25%
overall opacity:100
draw outside selection checked
Color settings:
color of your choice
preset: thin
opacity 100
save and your done!


written by crazykittie
8/1/2010

Saturday, July 31, 2010

Memories


Supplies:
Tube of choice
I used Rac's new LE
www.xeracx.net
mask of choice
i used 257 from
weescotslasscreations.blogspot.com
font i used is French script mt
kit is malt shop melody from Kat
nkdigitalart.us
got everything?

Let's go
Open a new 600x600 image
copy n paste paper8 from the kit
layers-new mask layer from image
source luminated checked everything
else unchecked, find your mask an apply
merge group.
adjust-blur-gausion blur radius 6
adjust-add/remove noise-add noise
uniform-monochrome-20%
copy n paste element 42 from the kit
resize as needed, grab your majic wand
an select the inside of the frame
selections-modify- expand 5
selections invert, copy n paste paper of choice
I used paper 13, hit delete do not deselect
move this layer below frame. copy n paste your
tube, resize as needed, making sure your tube
is above the frame layer an hit delete- selections
select none. move tube below frame layer.
copy n paste element 24 from the kit resize as needed
place on upper left corner of frame, add drop shadow of
choice. copy n paste element 35 resize as needed an place
at bottom of frame. copy n paste element 8 resize as needed
place to the lower left of frame.copy n paste element 39
resize as needed an place at bottom of frame but slightly lower.
copy n paste element 3 resize as needed place in front of the milk
shake but move slightly to the right. copy n paste element 5
resize as needed place to the right of the frame but slight over
the frame. copy n paste element 17 resize as needed place on upper
right corner of frame an move down a little. copy n paste element
33 resize as needed an place at the top of element 17.


resize your tag to suit you add artist info, text
an your done.

written by crazykittie
7/31/2010




Thursday, July 29, 2010

Go Green



Supplies:
Tube of choice
I used Amberly Brenedson
from Mistaken art
Scrap Kit is a fabulous freebie
from http://scrapsdimensions-dorisnilsa.blogspot.com
called never too green

No mask no outside filters
Ready? Let's Begin:
open a new 600x600 image
copy n paste frame 4 from the kit
resize as needed add drop shadow of choice
grab your magic wand click inside the frame
selections-modify-expand 3, selections-invert
copy n paste a paper of choice from the kit
and hit delete then move below the frame layer
make sure you are on your frame layer and add
your tube of choice resize if needed
when you have it where you want it, hit delete
then selections-none an move tube below frame layer
and above paper layer.add drop shadow of choice
copy an paste glitter swirl 1
from the kit, resize as needed and move below the
frame an to the right, duplicate-image mirror
now copy n paste flower 2 from the kit resize as needed
and place on top left corner of the frame.
add drop shadow of choice.
copy an paste butterfly of choice from kit
i used butterfly 3, resize as needed an place
on center of flower that you placed.
copy n paste leaves from the kit resize as needed
an place at the top of the frame, see tag for placement
copy n paste bow 4 from the kit, resize as needed
place on top right corner of frame, add drop shadow of choice
copy n paste leaves 2 from the kit, resize as needed
place on lower right corner of frame, then copy n paste
daisies resize a tad smaller then the leaves an place
them on top of the leaves but slightly lower
grab your eraser an erase the stem bottom on both the daisies
and leaves. copy an paste the lantern from the kit
resize as needed an place just to the right of the of the daisies.
copy n paste bow 2 resize as needed then place right at the bottom
of the daisies, using deform tool turn to the left just a little
see tag for reference.

now resize tag to your liking, add artist info
text, and your done.

written by crazykittie
7/29/2010

Tuesday, July 27, 2010

Night Out




Supplies:
Tube of choice
i use legends art
which can be purchsed at
http://www.mypsptubes.com/
Scrapkit Sophisticate from Juicy Bits
http://myjuicybits.blogspot.com/
thank you sweetie
Mask of choice i used
341 & 342 from http://www.weescotslasscreations.blogspot.com/
Got everything ready?
open a new 600x600 image so you have room to work
copy n paste beadspray from the kit
resize to fit as needed
copy n paste paper 3 from the kit
layers-new mask layer load mask 342
delete mask merge group
copy n paste paper 1 from the kit
layers-new mask layer load mask 341
delete mask merge group
adjust-blur-gaussian blur radius 6
adjust-add/remove noise-add noise
uniform checked 20% monochrome
copy n paste frame 1 from the kit
add drop shadow of choice
see tag for placement of frame
highlight frame layer, grab your majic wand
select inside of frame-selections-modify-expand 3
selections invert, copy n paste paper 12
hit delete, move this layer below the frame
leave selected, paste your tube in the frame
where you want it or a close if you have one.
when your satisfied hit delete, selections none
move tube below frame layer an on top of paper layer
now copy n paste bow 3 from the kit resize as needed
and place at top of frame, copy n paste sophisticate sign
place at bottom of frame. copy n paste butterfly 1
resize as needed an place on left side of frame
use deform tool to move butterfly so it lines up with
frame, add drop shadow of choice duplicate image flip
image mirror, place copy on bottom right of frame
add your full size tube place where your happy with it
resize tag to your likeness add artist info and text
an your done!

written by Crazykittie
7/27/2010

Sweet Summer




Supplies:
Tube of choice
I used one from kat
www.nkdigitalartshop.us
Kit of choice
One i used is from Kat
called Feng Shui

Ok lets begin
open 600 x600 new image
copy n paste element 20 from the kit
place toward the left a little an down
duplicate-flip-mirror
copy n paste element 3 from the kit
an center it over the other element
copy n paste element 1 from the kit
resize so it fits the top of the frame
add drop shadow of choice
highlight the frame layer an grab your
magic wand, hold down shift an click inside
the frame. selections-modify-expand 2
copy n paste a paper of choice from the kit
hit delete, selections none
copy n paste your tube of choice
resize if needed,add dropshadow
copy n paste element 17 no resize needed
using your deform tool menuver the ribbon
on both sides so that it lines up with
the side of the frame
go grab element 16 from the kit
copy n paste new layer resize if needed
place on lower right corner
see tag for placement.
that's it resize tag to your taste
add artist info an text an your done.
Written by Crazykittie
7/27/2010

Champagne


Supplies:
mask of choice
Tube of choice
I used Tim Lowery
which can be purchased at
kit kiss of gold from sunny side scraps
thank you sunny for your fabulous freebies
Open 600x600 new image
open your choice of paper
an copy n paste as new layer
apply mask, delete mask layer
merge group
adjust-add noise uniform 20%
monochrome checked
select a second paper, apply mask of choice
delete mask merge group
apply noise same as above
open element 26 copy n paste
as new layer, resize if needed
make sure your on the frame layer
the grab your magic wand
hold down the shift key an click inside frame
selections-modify-expand 5
selections invert, add your tube
resize if needed once your happy hit delete
selections none
move you tube below the frame layer an lower the
opacity till your happy with it
go grab element 55 an copy n paste as new layer
resize as needed, now move this below the top mask layer
copy n paste element 47 from the kit
resize as needed, using the deform tool
move it so it sits at the top of the frame
see tag for placement
now grab one of the flowers from the kit
i used element 44 copy n paste as new layer
resize as needed add drop shadow of choice
place on top left corner of frame
duplicate-image-mirror
now grap element 19 from the kit
copy n paste, resize as needed
place lower right of the tag
see tag for placement
add dropshadow of choice
now go grab element 20 from the kit
copy n paste, resize as needed place
on right side of champagne basket
see tag for placement.
now add your tube of choice
resize if needed, add artist info
text, save as png an your done!


written on 7/22/2010 by crazykittie


Eternal Beauty





Supplies:

Tube of Choice

I used the beautiful work of Kat
Eternal Beauty tube/graphic bundle
which can be purchsed at
mask of choice i used
WSL mask 104 from

Ready? Let's go
open a new image 600 x600
open bgo2 from the kit
copy n paste as new layer
then new mask layer from image
find your mask an apply it
delete mask merge group
next open the frame from the kit
copy n paste as new layer resize to your suiting
using your magic wand hold down shift
and click inside the frame
selections-modify-expand 3
selections invert
now open your tube of choice
copy an paste resize if needed the hit delete
and move below frame layer
next open corner element from kit
copy an paste as new layer resize if needed
place on left side of frame.
see tag for placement.
add drop shadow v -1,h 1 opacity 30 blur 5 color black
now open the rose from the kit
copy an paste as new layer resize if needed
place where you want it
see my tag for placement.
that's it
add your copyright info
text
and save as png.
and your done.


written by crazykittie
6/22/2010


Real Woman



Supplies:
Tube of choice
I used the wonderful work of Ismael Rac
can be purchased at
www.artisticmindsinc.com
one i used is an oldie purchased from
www.mypsptubes.com
Mask of choice
i used wsl mask 104
http://weescotslasscreations.blogspot.com/
Font of choice
i used BD Renaissance
http://www.dafont.com/bd-renaissance.font
Scrap Kit is a freebie from
http://fantasymoments-scraps.blogspot.com/
Diamonds and Pearls
word are from Mis Made
http://lilmamasldc.blogspot.com/


Now let's begin
Open new image 600x600
copy n paste element 44 from the kit
resize by 50% move to the right side of your image
make sure the ribbon is not touching the edge
duplicate-mirror
now copy element 53 from the kit
an resize till the top n bottom are lined
up with frames. see tag for placement
now make sure your left frame is highlighted
grab your magic wand, holding the shift
key select the inside of the frame
selections-modify-expand 3
copy n paste your tube, resize as needed
place over the left frame, one you have it where your happy
selections-invert an delete selections-none
move your tube below the frame
image-mirror.
copy element 58 from the kit
image flip, resize to fit.
the butterflys are element 52 n 53
copy n paste resize to fit, see tag for placement
once your happy with all that.
choose a paper from the kit, paste it above the bottom layer of the tag
layers-new mask layer from image
find your mask in the layers pallette
and merge group.
resize tag- sharpen once
add your copy right info, text, etc.
save as png and your done.

this tutorial was created by crazykittie
2/27/2010