Saturday, December 24, 2011

I Still Believe

Supplies:
 Tube I used Myriadelle PTE
Kit: I used Believe by Tammy Kat available for purchase @ PMTWS
Do not use same items I have unless you have purchased them an have a license to do so.
 Ready?
Open a 600x600 new image
Paste frame 2, grab your magic wand and
Select inside-selections-modify-expand3-invert
paste paper of choice-hit delete,
 move this below frame, go back to frame,
Paste your tube, resize if needed place where you want it,
Once your happy with it, hit delete selections non
E, move tube below frame.
Making sure your top layer is highlighted, paste the candy cane, resize.
Place on left side of frame, grab your deform tool, turn it slightly to the left.
Place it, duplicate-mirror, move copy over the original.
Paste dot ribbon, place at bottom of frame, paste ribbon bobble,
Resize place over the ribbon.
 Paste holly leaft, resize place on the right between the 2 bobbles.
Paste word art, resize slightly place at top of frame,
 paste tree, resize slightly move behind frame on the right.
 Merge layers, resize 1x by 85% add text,credits,etc..
Save an your done!!
 Written by crazykittie
12/24/2011
  

Thursday, December 22, 2011

Visions of Sugar Plums



Supplies:
Tube: I used Deborah Grieves, can be purchased @ PTE
Kit: I used Sugar Plum Collab by Polk dot scraps,Sarah Bryan & Pimp'd Designs can be purchased @ PMWTS
Do not use same ptu items i have unless you have purchased them an have a license to do so.
I used elements from all kits that are part of the collab.
Ready?
Open a new 650x650 image.
paste pd print 2, add/remove noise/add noise  gausian- monochrome checked @ 50%
paste pd frame 2, grab your magic wand select inside each frame-selections modify-expand 4
invert, paste paper of choice, hit delete, selections none, move paper below frame layer.
go back to frame layer, select inside first section with magic wand, expand 4 invert
paste your tube, selections none, do these same steps for the other 2 sections.
for the middle section mirror your tube before pasting it.
paste sugarplum ribbon pink, resize slightly an place at bottom of frame.
paste sb flower 2, resize, place on bottom right of frame, duplicate and move
copy to the bottom left. paste sb flower 1 resize an place at bottom middle.
paste pd candy mice, resize an place at top of the frame.
add any other elments of choice, merge, resize by 80% all layers checked
add text,credits,etc.. save and you done!!
written by crazykittie
12/21/2011

Wednesday, December 14, 2011

Sugar Cookies

Supplies:
Tube: I used Art by Leonardo Preda, available for purchase @ PTE
Kit: I used elements from Holiday Sweetness kit by Pimp'd Designs available for purchase @ PMWTS no outside filters or plugins used.
Do not use same ptu items i have unless you have purchased them an have a license to do so.
Ready? Open a new 650x650 image.
paste frame 4, select inside with your magic wand, expand 4-invert selection paste paper of choice, hit delete-selections none, move below frame layer.
go back to your frame, paste candy cane, resize by 80% 1x, grab you eraser tool set at size 24, erase part of the curve so it's hangin on the frame, paste 2nd candy cane mirror and place on right side, follow same steps as you did for the first one. paste ribbon 2, resize 80% 1x place on upper right of frame, if your using a tube that lays down, place it now. go back an erase the bottom part of the cane that is sticking out below your tube. paste the gingerbread man, resize 2x 80% or 1x 70% an place on the right of the frame. paste flower 2 resize 1x 80% place in front of the cookie n down slightly, paste flower 1 resize 1x 70% place down slightly from the other flower. paste candy of choice resize 60% 1x an place between the 2 flowers. paste cookie 3 resize slighty an place behind flower 1 ( see tag for placement help)
add any other elements of choice, merge visible, resize 1x by 80%,
add credits,text,etc.. save an your done! written by crazykittie 12/14/2011

Santa's lil Helper



Supplies: 
Tube: I used Art by Roman Zaric, available for purchase @ PTE 
Kit: I used Naughty Elves by Sarah Bryan available for purchase @ PMWTS 
no outside filters or plugins used. 
Do not use same ptu items i have unless you have purchased them an have a license to do so. 
Ready?
Open a new 650x650 image. 
Paste wreath frame-select inside with your magic wand-expand 8-invert, paste paper of choice hit delete- move below frame, go back to frame layer, 
paste close up of tube-hit delete-select none move tube below frame. paste snow, 
place at bottom of canvas-duplicate-mirror merge these 2 layers together. 
duplicate 3 x's an place at each edge of the canvas, move these layers all the way down. 
going back to your frame layer, paste the ornament, resize place on right side of frame. 
paste bow of choice, resize place at top left of frame, duplicate-mirror-flip.
paste any other elements of choice, merge all visible or flatten, resize 1x by 80% all layers. 
add credits,text,etc.. save an your done! 
written by crazykittie 12/14/2011

Tuesday, November 29, 2011

Winter Wonderland


Supplies:
Kit: Wisteria of Winter by Soxie Soxie
Mask: I used Mask#315 by Chelle
all elements an tubes are from the kit.

Do not use same ptu items i have unless you have purchased
them an have a license to do so.

Ready?

Open a new 600x600 image, paste paper of choice, apply mask, merge group.
add/remove noise-gausian,monochrome checked @ 30%
paste wintersnow element, pull to the very bottom, move left, duplicate mirror-merge these 2 layers
together. paste winter trees 1 place center of your canvas an pull toward the bottom a little.
paste winer winter tree 2 move to the left, paste winer winter tree 3 move to the right.
paste frame 4, select inside using magic wand, selections-expand2-invert, paste paper of choice
hit delete move below frame layer, leave selected an paste tube of choice, hit delete move this layer below frame layer, selections none. merge these 3 layers together an move slightly to the right and downward,
keeping slightly center of your canvas.
paste bird, resize an place so he is sitting on the branch. paste bambi, resize by 65%1x mirror, place on
right side.
add any wordart of choice, merge all flat or visible, resize 1x by 85% add credits,text,etc.. save an your done.
written by crazykittie
11/29/2011

Monday, November 28, 2011

Mystery in Red



Supplies:
Tube: I used Unholy Vault Designs her art is available for purchase @ PTE
Kit: I used To My Friend by Schnegge available for purchase @ DSI
Do not use same ptu items i have unless you have purchased them and have a license to do so.
Ready?
Open a new 650x650 image,
Paste frame of choice-select inside frame with magic wand selections-modify-expand3-invert,
paste paper of choice-hit delete-selections none.
move paper below frame and merge down.
Paste doodle 2 an move to upper right corner, move down.
paste doodle 1 rotate right 90 place to right of the frame-move down,
duplicate-mirror. go back to frame layer, paste your tube.
paste ivy move to right side of frame. paste flower 3,
place on right side of frame in front of ivy.
Paste chalice, resize an place at bottom right,
paste cat, resize an place at bottom next to the chalice.
paste bottle element of choice, rotate right 90, resize an place at bottom.
paste candle, move to the left an move it down behind the bottle.
merge visible, resize tag 85% add credits,text,etc..
save an your done!!
written by crazykittie 11/28/2011

Sunday, November 27, 2011

Midnight Magic


Supplies:
Tube I used Myka Jelina
Kit: I used Midnight Garden by Pimp'd Designs available for purchase @ PMTWS
Mask: I used Mask#179 by Chelle
Do not use same items I have unless you have purchased them an have a license to do so.
Ready?
Open a new 600x600 image.
paste paper of choice, apply mask, merge group.
paste window, grab magic wand-while holding down shift key,
click inside each frame of the window, selections-modify-expand 4,
paste another paper of choice into selection selections-none.
paste leaves element, move below frame, move to the left slightly,
grab eraser at size 15 an erase the stem sticking out at the bottom.
now go back to the window,
paste the lands misty element, move to bottom of window.
paste candlebra resize place to the left, bottom,
paste butterflies element, place over the window
but pull it toward the bottom left corner of your canvas.
paste your tube, place to the right of the window, add dropshadow of choice,
add word art to bottom of canvas, ( see tag for placement).
add any other elements of choice, merge all visible,
resize entire tag 1x by 85% add credits,text,etc... save an your done.
written by crazykittie 11/27/2011

Queen Bee


Supplies:
Tube: I used art by Francis Mary Available for purchase @ My Tubed Art
Kit: I used Queen for a day by Pimp'd Designs available for purchase @ PMTWS
Mask: I used Mask#88by Chelle
Do not use same items I have unless you have purchased them an have a license to do so.
Ready?
Open a new 600x600 image, paste frame 2 move it to center of your canvas.
select inside the frame with magic wand, selections-modify-expand 2 paste paper of choice, hit delete, selections none move paper below frame. go back to frame layer, paste another paper of choice, apply mask, merge group. paste swirl 2, move to left-duplicate-mirror. paste brackets, resize 1x by 85% place on left side of frame, duplicate, mirror. paste crown, resize 1x by 65% then again by 75% 1x. place on upper right corner. paste tube resize if needed, add dropshadow of choice, place infront of frame toward bottom of frame. paste lollipop, resize an place so it looks like she's holding it, (only if you are using same tube as me) paste any other elements of choice, merge visible, resize entire tag 1x by 85% add credits,text,etc... save an your done. written by crazykittie 11/27/2011

Frite Nite


Ready?
Open a new 600x600 new image
paste paper of choice, apply mask. paste blob elements of choice from kit.
paste wordart resize if needed.  now for the good stuff.
paste moon, resize, place in either right or left upper corner, your choice.
paste bats, resize, place in front of moon, paste spider web1 or 2, resize, place
in front of bats. if placing these elements on right side you will need to mirror the spider web.
paste house, resize, place in center of tag in front of the word art you previously added.
paste your tube, add dropshadow of choice using white as the color then re-apply using black.
paste slime vat, resize, place in front of tube toward bottom.
add any other elements of choice. merge visible, resize 1x by 85% add credits,text, ect..
* remember to sharpen 1x anything you resize then soften 1x.
written by crazykittie



Wednesday, September 7, 2011

Pixie Play Land



Supplies:
Kit: I used Wisteria by Polka Dot Scraps available for puchase @ PMWTS
Mask: I used #226 by Chelle
Do not use same ptu items i have unless you have purchased them an have a license to do so.
Ready? Open a new 650x650 image, paste paper of choice, apply mask-merge group.
open tree elment-grab your lasso tool, draw around one of the 2 trees, copy-paste onto your canvas, move to the left. paste element 30, place toward bottom of mask,
 paste element 24, resize, grab deform tool rotate till it is somewhat straight.
duplicate 3x's, and label these layers as leaves 1,2,3 & 4.
move layer 1 below the metal wire, move 2 up, 3 down an 4 up. paste the cottage, resize, place between leaves 1 and the wire.
paste element 28 resize, place in the center of the leaves. paste element 9, resize, rotate to the left slightly using the deform tool. place on right end of the leaves.
paste element 15, move it to the right an behind the leaves.
paste element 27 resize , move to the left an behind the cottage and in front of the tree. paste element 11, resize slightly an move down behind leaves an to the right.
paste bricks element an place in front of the mask an behind the mushrooms.
  paste pixies an resize each 1x by 50% (see tag for placement)
paste element 17, move to the upper left send to bottom, duplicate 2x's arrange, merge these 3 layers, an duplicate, move copy down about half way of the canvas. add any other elements of choice, merge, resize. add credits,text,etc.. save an your done! written by crazykittie 9/7/2011

Autum Love

Supplies:
Tube: I used art by Ariane Soares
Available for purchase @ My Tag Art
Kit: I used Autumn Love by Pimp'd Designs
available for purchase @ PMTWS
Mask: I used Mask#167 by Chelle
Do not use same items I have unless you have purchased them an have a
license to do so.

Ready?
Open a new 650 by 650 image, paste paper of choice, apply mask -merge group,
duplicate-mirror-flip, we will move them later.
paste frame of choice, select inside with magic wand- modify expand 4-invert.
paste paper, hit delete-move below frame, go back to frame, paste tube, hit delete
move down- selections none. merge paper,frame an tube layers-duplicate
on orginal copy, gaussian blur-radius 20. add noise gaussian, monochrome checked 61%
go to copy, resize by 80% 1x.
going back to your mask layers, move one copy to the left an up, move the other to the right an down.
paste tree, move down above mask layer an below frame, pull down just a little, ( see tag for placement)
paste green ribbon, resize slightly, place at top of frame.
paste pinecone, resize an place on left upper corner of frame.
paste lamppost, place on right side of frame.
paste the woodland element, place at bottom of frame, paste flower, resize, place to the bottom right.
paste any other elements of choice, merge, resize 1x by 80% add credits text etc.. save an your done!
written by crazykittie 9/7/2011


Tuesday, September 6, 2011

Pink Pixie

Supplies:
Tube: I used art by I use art by Gabriella Szabo
Available for purchase @ My Tag Art
Kit: I used My name is pixie by Schnegge
Mask: I used #93 by Chelle
Do not use same ptu items as i have unless you have purchased them an have a license to do so.

Ready?

Open a new 650x650 image, paste paper of choice-apply mask-merge group.
paste petals from the kit, resize by 85% place center of canvas
paste stars 1, place center of canvas.
paste starts 2, pull toward bottom left, duplicate-mirror-flip.
paste frame of choice, select inside with majic wand-modify-expand 4 invert
paste paper of choice, hit delete, move below frame layer.
go back to frame, paste tube, once happy with placement, hit delete.
move below frame layer.
add any other elements of choice, merge, resize.
add credits,text,etc... save an your done!
written by crazykittie 9/6/2011

Heavenly Love

Supplies:
I use art by Ariane Soares
Available for purchase @ My Tag Art
Kit: I used Heavenly by Kat
*Do not use same ptu items i have unless you have purchased them
and have a license to do so.*

Ready?

Open a new 650x650 image, copy n paste cloud from the kit, place to the left, duplicate-mirror.
paste element 21, resize place center of canvas.
paste element 11, resize an place center of e21, it will look like its propped if placed properly.
select inside the frame with your majic wand, modify-expand 6-invert.
paste paper of choice hit delete, move below frame layer.
go back to frame layer, paste tube, once happy with placement, hit delete-deselect.
move tube below frame layer.
paste element 02 resize an place at bottom of frame.
paste element 23 resize an place on right upper corner of frame.
paste element 14 resize an place on left side of frame, (see tag for placement)
add any other elements of choice, merge visible, resize.
add credits,text,etc. save an your done!!
written by crazykittie 9/3/2011

Monday, September 5, 2011

Bunny-Licious


Supplies:
Tube: I used Art by Keith Garvey, available for purchase @
Kit: I used elements from bunny collab kit by Pimp'd Designs & Sarah Bryan
available for purchase @ PMWTS
no outside filters or plugins used.
Do not use same ptu items i have unless you have purchased
them an have a license to do so.
Ready?
Open a new 650x650 image.
copy paste sb frame 1, resize 90% place center of your canvas.
grab your majic wand, select the inside of both circles of the frame.
selections-modify-expand 8 - invert.
paste paper of choice-delete, leave selected an go back to your frame layer.
paste close up of tube in first circle, when you have it where you want it, hit delete.
paste tube in 2nd circle an follow same steps as you did for first one.
selections none, move tube layers below frame an above paper layer.
go back to frame layer, paste sb charm 1, move to upper right corner of frame
add drop shadow of choice.
paste sb ribbon 1 move to bottom of frame (see tag for placement)
paste sb handcuffs resize an place on bottom right of ribbon, delete part of the
chain so its kinda hanging from the ribbon.
paste pd bag, resize an place on left side of ribbon (see tag for placement)
erase part of the chain so its hanging from the ribbon.
go back to frame layer paste pd sparkle over the frame, move to the right a little,
duplicate-mirror, move copy over to the left.
add any other elements of choice, merge, resize.
add credits,text,etc.. save an your done!!
written by crazykittie 9/3/2011

Saturday, September 3, 2011

Rockin' Emolicious


Supplies:
Tube: I used art by Celinart pinup available for purchase @ SATC
Kit: Emo rainbows by Tattoo freak available @
Mask: I used #262 by Chelle
Do not use same ptu items i have unless you have purchased them an have a license to do so.

Ready?
Open a new 650x650 image, paste paper of choice, apply mask-merge group.
add/remove noise-add noise- gaussian, monochrome checked @ 61%
paste 3 block frame, resize, image rotate left 90, grab magic wand an select inside each block,
modify expand 5 invert, paste paper hit delete move below frame layer, leave selected,
go back to frame layer paste tube, resize if needed, line up with center of frame
when your happy hit delete move below frame, deselect, go back to tube layer- lower the
opacity to around 65-70%.
paste element 35, resize-image mirror-place at top right corner of the frame.
paste element 5, resize, place at top of element 35.
copy n paste element 25, resize, place on right side of frame at bottom.
copy n paste tube of choice, resize, place on left side, duplicate an mirror
if you dont have 2 diff copies of tube.
paste element 9 from the kit, resize place at bottom left of canvas,
paste element 21 resize an place on the hand of element 9 so it looks
as if it's holding the glass.
add any other elments of choice, merge all visible or flatten, resize by 75%
add credits,text,etc... save an your done!
written by crazykittie 9/3/2011

Hot Kiss






Supplies:

Tube: I used Robert Alvarado his art is available for purchase @ PTE
Kit: I used Hot Kisses by Sarah available for purchase @
PMTWS
Mask: I used #51 by Chelle
Filters: DSB linear transmission
Do not use same ptu items i have unless you have purchased them and have
a license to do so.



Ready?

Open a new 650x650 image, paste paper of choice, apply mask-merge group
paste a 2nd paper of choice, apply mask-merge group. move one heart to upper left
an the other to the lower right.
paste 3 block frame, grab your majic wand, select inside each square, selections-modify-
expand 5-invert, paste paper of choice hit delete- selections none, move paper below frame layer. adjust-add remove noise- add noise- gaussian-monochrome checked-61%.
go to frame layer, select first box with magic wand-expand 5 invert, paste your tube,
when you have it where u want it, hit delete-selections none move below frame layer,
follow this same steps for the next 2 boxes, merge the 3 layers together, then apply
linear transmission with these settings: slice size 4, offset 3, blend -83 direction vertical.
making sure you are on the frame layer paste wire 2 resize an place at top of top left box.
paste the 3 kisses from the kit, place kiss 1at bottom left corner of top frame, kiss 2 at top right
of your canvas and kiss 3 at bottom right.
copy lipstick 1 resize, place at bottom left of your canvas, copy corset resize and place next to
lipstick 1, copy lipstick 2 resize image rotate-left 90 place at bottom right.
go back to kiss 3 layer an paste full size copy of your tube.
add any other elements of choice, merge visible, resize add credits, text, etc.. save and your done!!

written by crazykittie 9/3/2011

Thursday, September 1, 2011

All My Love


Supplies:
Tube I used Zindy Nielson
Kit: I used Into Forever by Pimp'd Designs available for purchase @ PMTWS
Mask: I used Mask#86 by Chelle
Do not use same items I have unless you have purchased them an have a license to do so.
*I used 75% on all resizing in this tut*
Ready?
Open a 650x650 new image paste paper of choice,
 layers-new mask layer-apply mask-merge group paste sparkles of choice from kit,
 place to your liking. paste frame of choice,
resize, select inside the frame with your magic wand expand 3,
invert- paste paper of choice hit delete- selections none
-move paper below frame layer. paste tube of choice,
once you have where you want it, erase or remove over hang using free hand selection.
copy n paste music sheet, resize-place on bottom right corner-see tag for placment,
 paste leaves element, resize place on right side of frame.
paste word art of choice, add any other elements of choice,
 once your happy merge all visible, resize, add credits, txt, etc..
save an your done.
written by crazykittie 9/1/2011

Wednesday, August 31, 2011

Portal to the Sea

Supplies:
Tube: I used art by Steve Baier
available for purchase @ UYA
Kit: I used Go Deep by Schnegge
available for purchase exclusively @ DSI
Do not use same items as i have unless
you have purchased them an have a license to do so.

Ready?
Open a new 650x650 canvas
copy n paste frame 4 from the kit, grab your majic wand an select the inside of the frame
selections-modify-expand 3-selections invert
copy n paste paper of choice, i used paper 11
hit delete-selections none. paste seagull from the kit,
resize and place so it is standing
on the fence post on the paper.
paste dolphin from the kit, resize and place over the water
on the paper, merge both elements to the paper move below the frame layer.
making sure you are above the frame layer,
paste the rocks layer in front of the frame.
paste seagrass, resize, move below the rock layer-duplicate-mirror-see tag for placement
paste flower 3, move to right side of frame,
duplicate-mirror, move both copies together,
merge down, pull top copy down slightly.
paste water 1 send to bottom-duplicate 2x's an arrange to your liking or
see tag for placement.
go back to rocks layer-paste your tube, resize if needed,
place where you want her, add dropshadow
of choice, add any other elements of choice, merge visible,
resize to 488x488 or your choice.
add credits,text,etc. save an your done.
written by crazykittie 8/31/2011

Monday, August 29, 2011

Sexy Mermaid

Supplies:
Tube: I used Lady Miska, can be purchased @ PTE
Kit: I used Pretty Mermaid by Polk dot scraps, can be purchased @
Do not use same ptu items i have unless you have purchased
them an have a license to do so.

Ready?
Open a new 650x650 image
copy n paste frame 4, resize 85% select inside frame with magic wand
expand 2 invert, paste paper of choice hit delete, selections none, move
paper below frame layer.
go back to frame, paste pearl on bottom left corner, place tube so
she is sitting on the pearl.
paste woven frabic, resize 75% rotate right 45, place on upper right corner
paste starfish resize 45% place on left end of fabric, paste shell, resize 45%
place to the right of starfish, see tag for placements.
paste the rope resize, place on upper right frame corner, below the frabic
copy n paste leaves 4, rotate right 90, place on bottom of frame below your tube.
on top layer, paste bubbles element, add dropshadow of choice, place where you want it. merge all visible, crop tag, resize 78% add credits, text, etc.. save an your done.
written by crazykittie
4/11/2011

Girl Next Door

Supplies:
Scrapkit: I used Girl next door by Tammy Kat
Can be purchased @ PMWTS
Mask: I used 224 From Chelle
Tube: I used Elias which can be purchased @ PTE
Do not use same ptu items i have unless you have purchased
them an have a license to do so.

Ready?
Open a new 650x650 image
copy n paste glitterbg purple, resize 1x by 80%
paste paper of choice, apply mask, merge group.
copy n paste black star, resize 75% place toward upper
left, paste pink star use same steps for other, place toward
lower right corner, on pink star layer, selections-select all-float-defloat
copy tube an paste once happy with placement hit delete-deselect.
paste purple frame strip, resize 80% place in middle of tag, grab magic
wand select the inside of each circle, invert selections-expand 3-paste
tube, now paste the pink frame strip use same steps as before, then rotate
left 45 an place left end behind purple frame.
paste purple stripe frame, resize 65% and place on right end of pink frame
then erase part thats hanging over the corner, see tag for placement.
now paste sexy wordart of choice, paste your tube, add any other elements of
choice, merge all visible, resize all layers to 510x510 add credits,text,etc.. save
and your done!
written by crazykittie
4/15/2011

Alice In Wonderland

Supplies:
Tube: I used the wonderful art of Tony Tzanoukakis can be purchased
@ PTE
Kit: I used Wonderland by Sarah Bryan, available for puchase @
Do not use same ptu items i have unless you have purchased
them an have a license to do so.

Ready?
Open a new 650x650 image
copy n paste frame 2, select inside frame with magic wand, expand 3
invert, paste paper of choice, delete- move below frame layer
go back to frame, paste tube of choice, once happy with placement
hit delete move below frame, selections none
copy n paste red mushrooms resize 70% 2x
 image mirror, place on bottom left
copy n paste rabbit, resize,
place in front of mushrooms.
copy n paste flamingo, resize 70% 1x
 place on right side of frame.
add any other elements of choice,
merge all visible, resize all layers checked
to 507x507, apply soft focus with default settings.
add credits,text etc, save an your done.
written by crazykittie
4/15/2011

Tuesday, March 22, 2011

So Soiree

Supplies:
Tube- I used Lucinda by Juicy Bits
Kit- I used Soiree also by Juicy Bits can be purchased at her
store.

Ready?
Open a new 650x650 image, transparent
copy n paste bracket back of choice
resize 1x by 80%, copy n paste glitter1 move up n to the right
duplicate-mirror-flip
copy n paste flourish 6 move near top of bracket-duplicate-mirror
copy n paste frame of choice-select inside with magic wand
copy n paste paper of choice-hit delete-back to frame
paste tube-resize if needed-hit delete- only do this step if using upright tube.
copy n paste flourish of choice resize 1x by 80% rotate to the left
slightly using deform tool move to upper left side of frame
copy n paste 2nd flourish use same step above
paste bow of choice-reisze paste upper left corner
paste flower of choice-resize place just below bow
but overlap the bow.
copy n paste any other elements of choice
merge visible or flatten, resize tag all layers checked 1x by 80%
add credits,text,ect.. save an your done.
written by crazykittie
3/22/2011

Kittie Mauvo


Supplies:
Tube- I used Lady Mishka
Kit- I used Mauve Melody by Carita
Mask- I used #262 from weescotlass

Ready?
Open a new 650x650 image,transparent
copy n paste paper of choice, apply mask-merge group
copy n paste frame of choice-rotate to the left slightly using deform tool
select inside frame with magic wand-expand 2-invert, paste paper
hit delete-move down-deselect.
go back to frame- paste tube of choice resize if needed.
animal tube preferred if you have.
copy n paste chain element resize by 80% 1x place on right upper side, copy n paste flower, resize 70% 1x place over
top link on chain.
copy n paste tree-resize 80% 1x place on left side
copy n paste book, resize 60% 1x place at bottom of tree
copy n paste basket resize 80% 2x place in front of book an to the right. paste angel charm, resize 80% 1x place on basket
then erase a little so its inside the basket.
merge all visible or flatten resize 80% 1x all layers checked
add credits,text, ect.. save an your done.
written by crazykittie
3/22/2011

Aries

Supplies:
Tube- I used Jose Cano
available for purchase @ PTE
Kit- I used Colors of Aries by Scrapin Daisy
Mask- I used #106 by weescotlass

Ready?
Open a new 650x650 image,transparent
copy n paste paper of choice-apply mask-merge group
add/remove noise-add noise with the below settings
uniform/monochrome checked-64%
copy n paste flower element- pull to the top left
copy n paste a 2nd flower element- mirror-flip
pull to the lower right.
copy n paste element 91 resize slightly move to upper right
copy n paste frame of choice-resize 80% 1x select inside with
magic wand, expand 3-invert, paste paper of choice-hit delete
move down- go back to frame-paste close up of tube-hit delete
move down- deselect.
lower the opacity of tube layer to 65 - 70
copy n paste full size tube move to right, resize if needed
copy n paste ribbon element of choice resize 80% 1x
place across bottom of frame-erase any tube hang out below.
copy n paste any other elements of choice-merge visible or flatten. resize tag 1x by 80% -adjust soften then sharpen
add credits,text,ect.. save an your done.
written by crazykittie
3/22/2011

Wednesday, March 16, 2011

Red is for Love

Supplies:
Tube-I used Tim Lowery available for purchase @ PTE
Kit- I used Red & Black by Scrapin Daisy
No outside filters or plugins used.

Ready?
Copy n paste round frame of choice, resize by 60%
select inside with magic wand-expand 2-invert
paste paper of choice- hit delete-move down
go back to frame-paste close up of tube or if not available
paste tube, resize slightly, when your happy hit delete,
move down-selections none-merge together paper,frame,
 and tube layers. move this slightly to the left.
copy n paste element 32 send to bottom-move to the right
duplicate-mirror, move to the left so that it is sticking out just a little
, make sure the stems of both copies are behind the frame.
copy n paste element 34, move to upper right-send to bottom.
add any other elements of choice,
merge visible-resize tag 1x by 85% add credits,text,ect..
 save an your done.
written by crazykittie
3/16/2011

Monday, March 14, 2011

BlackBird


Supplies:
Tube- I used Myka Jelina
Kit- I used BlackBird by Juicy Bits
Mask- I used #224 by weescotlass
Ready?
Open a new 700x700 image,transparent
copy n paste paper of choice, apply mask, merge group
copy n paste element 27- rotate left 45, duplicate 2x
move one copy toward the top, one in the middle
then one toward the bottom.
copy n paste stars element- resize 70% 1x place toward
 upper left corner-duplicate-mirror-flip.
copy n paste element 41 rotate left 45 select inside
 with magic wand expand 4 invert, paste paper of choice hit delete,
 move down go back to frame, paste tube, hit delete move down, deselect.
paste heart frame, rotate right 45 follow same steps for other frame.
copy n paste key element, resize 70% 1x rotate right 90
place over square frame, erase part of it so its hanging from the frame.
copy n paste bird element resize 70% 2x place to the right of heart frame.
copy n paste butterfly resize 70% 2x place at bottom right of heart.
copy n paste button of choice, place one to upper right
 an one to the bottom left of the frames.
merge all visible- resize tag 85% 2x
add credits,text, ect.. save an your done.
written by crazykittie
3/14/2011

Happy Easter



Supplies:
Tube I used Shawli
available for purchase @ MPT
Kit: I used Funky Easter from Pimp'd available for purchase @
PMTWS
Mask: I used # 120 from weescotlass

Ready?
open a new 700x700 image,transparent
copy n paste paper of choice, apply mask, merge group
pull to the left, duplicate-mirror.
copy n paste hearts element of choice, move to upper left corner
of canvas.
copy n paste round frame of choice- select inside with magic wand, expand 4-invert paste paper of choice hit delete- selections none- move down.
go back to frame layer copy n paste tube, one laying down is best
copy n paste grass2 place between tube n frame layers, see tag for placement.
copy n paste bunny-resize to your liking, place to the left.
copy n paste flowers of choice-resize first one move to the right
rotate slightly to the right using deform tool.
resize 2nd flower use same steps as for the first one.
copy n paste any other elements of choice.
merge all visible, resize tag, add credits,text,ect.. save an your done.
written by crazykittie
3/13/2011

Sunday, March 13, 2011

Emo Cutie



Supplies:
Tube- I used Lady Mishka
available for purchase @ PTE
Kit- I used Emo Cutie by Pimp'd Designs
availabe for purchase @ PMTWS
Mask- I used # 79 by weescotlass
Filter- dsb flux- linear transmission

Ready?
Open a new 700x700 image,transparent
copy n paste paper of choice-apply mask-merge group
copy n paste glitter1 move up toward the upper right
duplicate-mirror-flip
copy n paste glitter2 move down toward bottom right
duplicate-mirror-flip.
copy n paste stars1 move up to upper left duplicate-mirror-flip
copy n paste frame3 resize 1x by 90%
select all 3 sections with magic wand-expand 4-invert
paste paper of choice-delete- deselect-move down.
go back to frame-select inside first section with magice wand
expand 4-invert paste your tube- hit delete- move down-selections none.
duplicate -mirror-merge the 2 copies, then apply linear transmission with the settings below Photobucket
now paste a your tube full size an place it center front of frame.
copy an paste chain1 place on upper right corner of frame- see tag for placement, then erase part of it so it looks like its hanging.
copy n paste lips element, place bottom left corner, add dropshadow.
add any other elements of choice-merge visible or flatten
resize tag, add credits, text,ect.. save an your done.
written by crazykittie
3/13/2011

Saturday, March 12, 2011

Let me be your Honey



Supplies:
Tube- I used Jose Cano
you can purchase his art @ PTE
Kit- I used Bonnie by Polka Dot Scraps, can be purchased @ PMTWS
Mask- I used 254 by weescotlass

Ready?
Open a new 700x700 image, transparent
copy n paste beads1 place toward upper left- duplicate-mirror-merge down duplicate-flip.
paste paper of choice- apply mask-merge group-duplicate-merge down.
paste frame 3-rotate right 45 2x, select inside the frame-expand3 invert- paste paper of choice- hit delete- go back to frame
paste close up of tube if available- hit delete when your happy with it, move down. go back to frame again-paste your tube
place on right side-erase any hanging below the frame
copy n paste button1 place on left corner of frame.
paste deco1 rotate right 90, move over bottom section of frame-duplicate-mirror-merge down, add dropshadow of choice,
paste ribbon1 center of deco1.
add any other elements of choice-merge visible or flatten-resize your tag, add credits, text,ect.. save an your done.
written by crazykittie
3/12/2011

Pinky Kitten



Supplies:
Tube- I used Keith Garvey you can purchase his artwork @ PTE
Mask- I used 245 from weescotlass
Kit- I used Kitty by Juicy bits



Ready?
Open a new 700x700 image, transparent
copy n paste paper of choice- apply mask-merge group
add noise- gausian/monochrome checked- 25%
copy n paste ribbon of choice (1-3), pull toward bottom right
of canvas-duplicate-mirror-flip
copy n paste one of the rectangle frames, rotate left 90
select inside the frame with magic wand-expand 4-invert
paste paper of choice- hit delete, move down-go back to frame
layer- paste close up of tube- resize slightly hit delete-move down
go back to frame layer- paste standing copy of tube- mirror- move
to the right- erase part of the one of the legs so it looks like she
is stepping into the frame.
open the wordart, using freehand tool draw around the wordart of your choosing, copy n paste- resize 80% using deform tool
rotate it to the left- an place at top left corner of your frame.
add any other elements of choice- merge all visible or flatten
resize tag, add credits,text,ect.. save an your done.
written by crazykittie
3/12/2011

Bluey



Supplies:
Tube- I used Myka Jelina
Kit- I used Blue Skys by Scrappin Daisy
Thank you Ruth for another fabulous creation!
Mask- I used 327 by weescotlass

Ready?
Open a new 700x700 image, transparent
copy n paste paper of choice, apply mask-merge group
adjust-blur-gausian 15%, add/remove noise- add noise- gausian/monochrome checked-30%
copy n paste element 9 or swirly of choice place to the left
of your canvas-duplicate-mirror-flip.
copy n paste frame of choice-select inside with magic wand
modify-expand 4-invert, copy n paste paper of choice-hit delete
move below frame, go back to frame layer-paste tube close up
when your happy hit delete selections none, move below frame layer-lower the opacity of this layer between 65-70.
paste your tube, resize if needed, add drop shadow of choice
paste ribbon of choice place toward bottom of frame over your tube use deform too to push the sides in so that it lines up with
the frame, go back to your tube an erase any parts showing below the ribbon.
copy n paste bow of choice resize by 77% 1x place at top left corner, rotate to the left slightly using deform tool.
copy n paste dragonfly or butterfly of choice, resize an place
over the bow.
copy n paste flower bundle of choice from the kit resize by 77%
place on bottom right corner, copy n paste butterfly of choice resize - mirror place over the flowers.
merge all visible-resize tag, add your credits,text ect.. save an your done.
written by crazykittie
3/11/2011

Friday, March 11, 2011

Lucky Be da Irish



Supplies:
Tube- I used Myriadelle
available for purchase @ My Tag Art
Kit- I used Irish Cream by Shal's world
also available for purchase @ mytagart.com
Mask- I used mask # 61 by weescotlass

Ready?
Open a new 700x700 image, transparent
copy n paste paper of choice-apply mask-merge group
duplicate-merge down.
copy n paste shamrock corner element move toward upper
left, duplicate-mirror-flip.
copy n paste swirly element, pull toward bottom left-duplicate-mirror-flip.
paste close up of your tube if you have one, copy n paste
2 flower clovers of choice resize by 70% 1x place 1st one
to bottom left of tube, see tag for placement.
do same for 2nd one, place it so it overlaps the first one a bit
merge down, dropshadow of choice, duplicate-mirror- merge down, duplicate-flip move the 2nd copy of clovers up an behind your tube, then pull them down a bit.
add any other elements of choice, merge visible or flatten,
resize- all layers checked by 70% add credits text, ect..
save an your done!
written by crazykittie
3/10/2011

Thursday, March 10, 2011

Cubby



Supplies:
Tube I used Myriadelle
available for purchase @ My Tag Art
Kit: I used New Beginnings by Sylvie Thank you sylvie for another
wonderful creation!

Ready?
Open a new 700x700 image, transparent
copy n paste frame that compliments your tube colors
resize 64% select inside both sides of the frame-expand 4-invert
paste paper of choice-hit delete move below frame-deselct
go back to frame layer select inside left side of frame-expand 4
invert- paste your tube resize if needed when your happy with it
hit delete move below frame deselect- repeat the last step for other side of frame.
choose 2 between elements 11-14 that compliment your tube
copy n paste- resize send to bottom place first one on right side
copy n paste 2nd element resize send to bottom mirror place
on left side.
copy n paste any other elements of choice- remember sharpen after scaling down, merge all visible, crop, resize to your liking
add credits,text, ect. save an your done.
written by crazykittie
3/9/2011

Wednesday, March 9, 2011

Charmed




Supplies:
Tube I used Melia Newman
Available for purchase @ My Tag Art
Kit: I used Charming by Jolene Here
supplied with permission, thank you jolene for another
fabulous creation.

Ready?
Open a new 700x700 image, transparent
paste frame-select all open areas with magic wand-expand 5
invert, paste paper of choice hit delete- move below frame
go back to frame layer- paste tube of choice, resize as needed
place where you want it, hit delete-deselect an move below frame.
paste doodle- place on left side-send to bottom-duplicate-mirror-flip.
paste hearts element, resize place at bottom left
paste heart string- resize place on left of frame.
paste flower of choice- resize an place at top of
hearts string.
paste tags element-resize place at top right, paste bow
of choice resize-place at top of tag string.
paste any other elements of choice- remember to sharpen
anything you scale down.
merge all visible, resize tag to 450x450 sharpen
add credits,text ect.. save an your done
written by crazykittie
3/9/2011

Girls Only




Supplies:
Tube-I used Zindy
Kit- I used Just Us Girls by polkdotscraps can be purchased @
pmtws
Mask- I used 342 from weescotlass

Ready?
Open a new 700x700 image
paste paper of choice-apply mask- merge group
add/remove noise-add noise- random/monochrome checked
@ 30%
paste element 7, copy n paste frame of choice
select inside the frame with magic wand- expand 5
paste paper of choice- hit delete- move down go back to frame layer
paste tube(s) of choice when your happy-hit delete-move down
deselect.
paste girls element, resize center at top of frame
paste element 15 resize place center of frame if using
same one. paste element 27, resize place at top of ribbon.
paste element 46 see tag for placement.
paste any other elements of choice-merge visible
resize tag to your liking, sharpen- add credits,text,ect..
save an your done.
written by crazykittie
3/9/2011

Rocker Girl




Supplies:
Tube- I used a poser from the kit
Kit- I used I Rock can be purchased @
pmtws
Mask- I used 77 & 115 from weescotlass

Ready?

Open a 700x700 new image transparent
paste paper of choice, apply mask 77-merge group
pull toward top left of canvas-duplicate-flip-mirror
paste another paper of choice, apply mask 115-merge group
paste frame of choice resize- select inside of frame w/magic wand- expand 4 invert paste paper of choice-delete
move below frame layer- go back to frame
paste tube-resize, when your happy with it, hit delete
move this below frame layer- deselect
paste handcuffs of choice-resize move to top left of frame
erase the part over the frame so it looks like they are hanging
from it.
paste skull element resize 80% place on left side of frame
paste microphone of choice resize place on left side of frame
move below skull chain.
paste record element resize an place at bottom left
paste rockstar element of choice resize an place on upper right
side of frame, paste heart element of choice-resize 30% 2x
place over staple on heart element.
add any other elements of choice, place to your liking.
merge all visible or flatten, resize tag to 448x448-sharpen
add credits,text, ect.. save an your done.
written by crazykittie
3/9/2011

Tuesday, March 8, 2011

So Loved







Supplies:
Tube- I used Zindy
Kit- I used Stefan by PDS can be purchased @ pmtws

Ready?
Open a new 600x600 image, transparent
copy n paste frame 2, grab magic wand and
select inside the frame-expand 4-invert
paste paper of choice- hit delete-move below frame
go back to frame layer paste your tube-hit delete
move below frame- deselect.
paste string 3 place at bottom for frame-
paste string 2 place at bottom.
paste ribbon 4 at top left corner-resize 70%
paste charm 1 resize 80% 2x if needed place
under the bow.
paste flower 2 resize place on right corner of frame.
paste butterfly from tube if using same one. place on
left bottom corner.
paste glow 1 element move toward top of canvas send to bottom
duplicate-mirror- flip. resize tag, add credits, text, ect.. save an your done.
written by crazykittie
3/8/2011

Butterflies





Supplies:
Tube: I used Holly Durr can be purchased @ My Tag Art
Kit: I used Moments by Jolene which I have supplied
with permission, Thanks Jo for another wonderful creation
Here
Mask: I used #80 from weescotslass


Got Everything?
Open a new 600x600 image, transparent
copy n paste the frame from the kit-image-rotate left 90
grab your magic wand select inside all open areas
modify-expand 4-invert paste paper of choice
hit delete-leave selected move paper below frame
go back to frame layer- paste your tube, resize an place
where you want it, hit delete move below frame-selections none
copy n paste another paper of choice- apply mask-merge group
send to bottom, place where you want it, duplicate-mirror-flip
copy n paste lace- resize 80% using deform tool move the
end inwards so they line up with the frame, move it down just a bit, duplicate- mirror
copy n paste flower chain-place on left side of the frame, move down under the frame an above the lace.
copy n paste bow charm- resize 80% place on right side of frame, see tag for placement.
copy n paste butterfly 2 place at bottom left corner, paste
butterfly 1 rotate left 25 or 30 place on bottom right.
add any other elements of choice, merge all visible
resize tag, sharpen. add credits text, ect.. save an your done
written by crazykittie
3/8/2011

Monday, February 28, 2011

Sweet Flower




Supplies:
Tube: I used Rachael Tallamy
can be purchased @ UYA
Kit: I used Katherine by Polka Dot Scraps can be purchased @
pmtws
Mask: I used 353 from
Chelle
do not use same artwork unless you have purchased them
an have license to do so.

Ready?
Open a 700x700 new image-transparent
paste flower scatter1 from the kit
place toward top of canvas-duplicate 2x
on 1st copy-mirror an move to middle- 2nd copy
move toward bottom of canvas
paste paper of choice- apply mask-merge group
add/remove noise-add noise with these settings
gausian/monochrome checked @ 30%
paste frame2 resize 80% select inside w/magic wand
modify-expand 4 invert- paste paper of choice hit delete
deselect- move paper below frame.
paste tube of choice- resize to your liking, i resized 80% 1x
leave tube on top of frame, flowers will cover the bottom
paste leaves 1 rotate left 90- duplicate-mirror
place both at bottom of frame, overlapping.
paste flower1 from the kit-rotate left90, place in front
of the leaves-duplicate mirror- erase a little of the stem
hanging over the original flower copy.
paste doodle1- place over the flowers
paste flower4 resize 70% 2x or to your liking- sharpen
place toward left side of doodle but dont over the end
duplicate- mirror.
add any other elements of choice, merge all visible
resize tag down to 500 pixels-sharpen.
add credits,text,ect.. save and your done.
written by crazykittie
2/28/2011

Don't Die Today




Supplies:
Tube: I used Zindy Nielson
Kit: I used Damon by Polka Dot Scraps can be purchased @
pmtws
Mask: I used 263 from
Chelle
do not use same artwork unless you have purchased them
an have license to do so.

Ready?
Open a 700x700 new image-transparent
copy paper of choice from the kit paste
apply mask-merge group.
paste wire from the kit, paste sparkle an scatter elements
pull the sparkle up toward the upper right corner-duplicate-mirror-flip
duplicate the scatter 2x and place them to your liking.
paste frame 2 or frame of choice- grab magic wand, select inside
the frame- modify expand 2 invert-paste paper of choice-delete
move below frame - back to frame layer- paste your tube, resize
if needed place where you want it, hit delete- selections none- move tube below your frame.
paste leaves 1 resize 70% 1x , paste leaves 2 resize 70%
see tag for placement.
paste flowers 1 an flowers 4 follow same steps as for the leaves.
add any other elements of choice.
remember to sharpen any items you scaled down.
merge all visible- resize tag down to under 500 pixels
sharpen-add credits, text, ect.. save an your done.
written by crazykittie
2/28/2011

Sunday, February 27, 2011

Kiss Me, I'm Irish




Supplies:
Tube-I used Shawli can be purchased @
MPT
Kit- Lucky Day by Pimp'd Designs can be purchased @
pmtws
this one is super simple
Ready?
Open a new 600x600 image-transparent
copy n paste paper of choice from the kit
paste rainbow-resize 70% 1x or to your liking
paste kiss me element resize 70% 1x rotate left 45
paste clover element resize 60% 1x place on left
side toward the bottom-duplicate-mirror
paste grass element place at bottom of canvas
paste pot of gold- resize 60% 2x - sharpen place on
right side, paste mushroom element- resize 60% place
to the left of pot o gold.
paste leprachaun resize 60% 1x place in front of mushroom
an gold.
add tube an any other elements of choice.
merge all flatten- add borders 5 symetric color white
select with magic wand, paste paper of choice into selection
or fill with color of choic.
resize tag all layers checked by pixes down to 442x442
sharpen, add credits,text,ect.. save an your done.
written by crazykittie
2/27/2001

Sweetly,Tenderly



Supplies:
Tube: I used the wonderful art of Suzanne Woolcott
do not use unless you have purchased & have license
to do so.
Kit: I used the beautiful Eliza from Juicy Bits

Ready?
Open a new 600x600 image, transparent
copy n paste element 25 from the kit
grab your magic wand select inside the frame
modify expand 3 - invert, paste paper of choice
delete-selections none- move below frame layer
back to frame layer, add your tube resize if needed
now go grab element 18 from the kit, paste it on top
right corner, copy n paste element 14 from the kit
move it over element 18 so that it covers the frame
of 18.
now paste element 7 from the kit, place it over the ribbon
of element 18
now paste element 16 from the kit, place at bottom of frame
using your deform tool push the sides of the fence in so
they line up with edges of the frame.
paste element 17 from the kit, place it at bottom left of frame
place it so it overhangs a little.
paste element 5 from the kit, resize 80% 1x sharpen
place next to element 17.
paste element 6 from the kit, resize 70% 1x mirror
place on right side of tag.
sharpen anything you resized. merge all layers visible
crop of excess space- resize all layers checked by 85%
sharpen, add credits,text, ect. save an your done.
written by crazykittie
2/27/2011

Happy St. Pat's



Supplies:
Tube: I used Keith Garv can be purchased from
PTE
Kit: I used Golden Luck by Carita
& can be purchased @ PTE
thank you sweetie for another awesome kit!
do not use same tube unless you have purchase it
an have license to do so.

Ok Ready?
Open a new 600x600 image, transparent
you can use frames from the kit an go on your own
or you can use my tut lol
grab your preset tool, rounded rectangle
create as vector,antialias checked-width 30-miter limit 15
draw out a rectangle-x 450-y 514
convert to raster-selections-select all-float-defloat
now grab paper of choice-paste into seletion
delete-deselect.
grab your magic wand select inside your rectangle
modify-expand 3- invert- paste paper of choice-delete
back to frame layer- paste your tube resize if needed
hit delete- selections none, move tube an paper layer
below frame layer.
merge all layers visible, duplicate 2x rotate 1st copy left 45
an rotate 2nd copy right 45-arrange them to your liking
now bring your original to the top.
paste ribbon 3 from the kit-resize by 70% 1x, move it
to the top left of the frame- rotate it with your deform tool
till it looks like its hanging from the frame.
grab your eraser tool an erase part of the ribbon loop
paste the hat from the kit-resize place at bottom left
paste the horseshoe-resize place at bottom left-move behind
the hat.
paste splat from the kit place at top right send to bottom
place where you want it-duplicate-flip-mirror.
add any other elements of choice- merge all visible
resize tag all layers checked by pixels to 510x510 or
size of your choice, sharpen-add credits, text,ect.
save an your done.
written by crazykittie
2/27/2011

Saturday, February 26, 2011

Old Country



Supplies:
Tube I used Gina Canday Adler Can be purchased @ My Tag Art
Kit: I used Legacy by Jolene Burke
thank you jo for this fabulous freebie!
kit supplied with permission

This tut is super simple, no resizing except
for when you finish the tag.

Ready?
Open a new 600x600 image-transparent
copy n paste the frame from the kit
select inside of frame w/ your magic wand
modify-expand 3- invert
paste image of your tube if you have its available
if not use a paper of choice.
resize if needed, once your happy with it, hit delete
an move below frame layer.
now paste doodle from the kit, place at bottom left
corner of frame, line it up so its right a the edge of
your canvas. send to bottom- duplicate-mirror-flip.
now making sure your on the frame layer
copy an paste 2 flowers of choice, place on bottom
left corner, slightly overlapping-merge down-duplicate-mirror-flip
now paste postcard from the kit, place at bottom right corner
paste bundle from the kit, place over the center of the postcard.
merge all visible-resize by pixels all layers checked to 480x480
sharpen 1x add credits,text,ect. save an your done.
written by crazykittie
2/26/2011