Tuesday, March 22, 2011

So Soiree

Supplies:
Tube- I used Lucinda by Juicy Bits
Kit- I used Soiree also by Juicy Bits can be purchased at her
store.

Ready?
Open a new 650x650 image, transparent
copy n paste bracket back of choice
resize 1x by 80%, copy n paste glitter1 move up n to the right
duplicate-mirror-flip
copy n paste flourish 6 move near top of bracket-duplicate-mirror
copy n paste frame of choice-select inside with magic wand
copy n paste paper of choice-hit delete-back to frame
paste tube-resize if needed-hit delete- only do this step if using upright tube.
copy n paste flourish of choice resize 1x by 80% rotate to the left
slightly using deform tool move to upper left side of frame
copy n paste 2nd flourish use same step above
paste bow of choice-reisze paste upper left corner
paste flower of choice-resize place just below bow
but overlap the bow.
copy n paste any other elements of choice
merge visible or flatten, resize tag all layers checked 1x by 80%
add credits,text,ect.. save an your done.
written by crazykittie
3/22/2011

Kittie Mauvo


Supplies:
Tube- I used Lady Mishka
Kit- I used Mauve Melody by Carita
Mask- I used #262 from weescotlass

Ready?
Open a new 650x650 image,transparent
copy n paste paper of choice, apply mask-merge group
copy n paste frame of choice-rotate to the left slightly using deform tool
select inside frame with magic wand-expand 2-invert, paste paper
hit delete-move down-deselect.
go back to frame- paste tube of choice resize if needed.
animal tube preferred if you have.
copy n paste chain element resize by 80% 1x place on right upper side, copy n paste flower, resize 70% 1x place over
top link on chain.
copy n paste tree-resize 80% 1x place on left side
copy n paste book, resize 60% 1x place at bottom of tree
copy n paste basket resize 80% 2x place in front of book an to the right. paste angel charm, resize 80% 1x place on basket
then erase a little so its inside the basket.
merge all visible or flatten resize 80% 1x all layers checked
add credits,text, ect.. save an your done.
written by crazykittie
3/22/2011

Aries

Supplies:
Tube- I used Jose Cano
available for purchase @ PTE
Kit- I used Colors of Aries by Scrapin Daisy
Mask- I used #106 by weescotlass

Ready?
Open a new 650x650 image,transparent
copy n paste paper of choice-apply mask-merge group
add/remove noise-add noise with the below settings
uniform/monochrome checked-64%
copy n paste flower element- pull to the top left
copy n paste a 2nd flower element- mirror-flip
pull to the lower right.
copy n paste element 91 resize slightly move to upper right
copy n paste frame of choice-resize 80% 1x select inside with
magic wand, expand 3-invert, paste paper of choice-hit delete
move down- go back to frame-paste close up of tube-hit delete
move down- deselect.
lower the opacity of tube layer to 65 - 70
copy n paste full size tube move to right, resize if needed
copy n paste ribbon element of choice resize 80% 1x
place across bottom of frame-erase any tube hang out below.
copy n paste any other elements of choice-merge visible or flatten. resize tag 1x by 80% -adjust soften then sharpen
add credits,text,ect.. save an your done.
written by crazykittie
3/22/2011

Wednesday, March 16, 2011

Red is for Love

Supplies:
Tube-I used Tim Lowery available for purchase @ PTE
Kit- I used Red & Black by Scrapin Daisy
No outside filters or plugins used.

Ready?
Copy n paste round frame of choice, resize by 60%
select inside with magic wand-expand 2-invert
paste paper of choice- hit delete-move down
go back to frame-paste close up of tube or if not available
paste tube, resize slightly, when your happy hit delete,
move down-selections none-merge together paper,frame,
 and tube layers. move this slightly to the left.
copy n paste element 32 send to bottom-move to the right
duplicate-mirror, move to the left so that it is sticking out just a little
, make sure the stems of both copies are behind the frame.
copy n paste element 34, move to upper right-send to bottom.
add any other elements of choice,
merge visible-resize tag 1x by 85% add credits,text,ect..
 save an your done.
written by crazykittie
3/16/2011

Monday, March 14, 2011

BlackBird


Supplies:
Tube- I used Myka Jelina
Kit- I used BlackBird by Juicy Bits
Mask- I used #224 by weescotlass
Ready?
Open a new 700x700 image,transparent
copy n paste paper of choice, apply mask, merge group
copy n paste element 27- rotate left 45, duplicate 2x
move one copy toward the top, one in the middle
then one toward the bottom.
copy n paste stars element- resize 70% 1x place toward
 upper left corner-duplicate-mirror-flip.
copy n paste element 41 rotate left 45 select inside
 with magic wand expand 4 invert, paste paper of choice hit delete,
 move down go back to frame, paste tube, hit delete move down, deselect.
paste heart frame, rotate right 45 follow same steps for other frame.
copy n paste key element, resize 70% 1x rotate right 90
place over square frame, erase part of it so its hanging from the frame.
copy n paste bird element resize 70% 2x place to the right of heart frame.
copy n paste butterfly resize 70% 2x place at bottom right of heart.
copy n paste button of choice, place one to upper right
 an one to the bottom left of the frames.
merge all visible- resize tag 85% 2x
add credits,text, ect.. save an your done.
written by crazykittie
3/14/2011

Happy Easter



Supplies:
Tube I used Shawli
available for purchase @ MPT
Kit: I used Funky Easter from Pimp'd available for purchase @
PMTWS
Mask: I used # 120 from weescotlass

Ready?
open a new 700x700 image,transparent
copy n paste paper of choice, apply mask, merge group
pull to the left, duplicate-mirror.
copy n paste hearts element of choice, move to upper left corner
of canvas.
copy n paste round frame of choice- select inside with magic wand, expand 4-invert paste paper of choice hit delete- selections none- move down.
go back to frame layer copy n paste tube, one laying down is best
copy n paste grass2 place between tube n frame layers, see tag for placement.
copy n paste bunny-resize to your liking, place to the left.
copy n paste flowers of choice-resize first one move to the right
rotate slightly to the right using deform tool.
resize 2nd flower use same steps as for the first one.
copy n paste any other elements of choice.
merge all visible, resize tag, add credits,text,ect.. save an your done.
written by crazykittie
3/13/2011

Sunday, March 13, 2011

Emo Cutie



Supplies:
Tube- I used Lady Mishka
available for purchase @ PTE
Kit- I used Emo Cutie by Pimp'd Designs
availabe for purchase @ PMTWS
Mask- I used # 79 by weescotlass
Filter- dsb flux- linear transmission

Ready?
Open a new 700x700 image,transparent
copy n paste paper of choice-apply mask-merge group
copy n paste glitter1 move up toward the upper right
duplicate-mirror-flip
copy n paste glitter2 move down toward bottom right
duplicate-mirror-flip.
copy n paste stars1 move up to upper left duplicate-mirror-flip
copy n paste frame3 resize 1x by 90%
select all 3 sections with magic wand-expand 4-invert
paste paper of choice-delete- deselect-move down.
go back to frame-select inside first section with magice wand
expand 4-invert paste your tube- hit delete- move down-selections none.
duplicate -mirror-merge the 2 copies, then apply linear transmission with the settings below Photobucket
now paste a your tube full size an place it center front of frame.
copy an paste chain1 place on upper right corner of frame- see tag for placement, then erase part of it so it looks like its hanging.
copy n paste lips element, place bottom left corner, add dropshadow.
add any other elements of choice-merge visible or flatten
resize tag, add credits, text,ect.. save an your done.
written by crazykittie
3/13/2011

Saturday, March 12, 2011

Let me be your Honey



Supplies:
Tube- I used Jose Cano
you can purchase his art @ PTE
Kit- I used Bonnie by Polka Dot Scraps, can be purchased @ PMTWS
Mask- I used 254 by weescotlass

Ready?
Open a new 700x700 image, transparent
copy n paste beads1 place toward upper left- duplicate-mirror-merge down duplicate-flip.
paste paper of choice- apply mask-merge group-duplicate-merge down.
paste frame 3-rotate right 45 2x, select inside the frame-expand3 invert- paste paper of choice- hit delete- go back to frame
paste close up of tube if available- hit delete when your happy with it, move down. go back to frame again-paste your tube
place on right side-erase any hanging below the frame
copy n paste button1 place on left corner of frame.
paste deco1 rotate right 90, move over bottom section of frame-duplicate-mirror-merge down, add dropshadow of choice,
paste ribbon1 center of deco1.
add any other elements of choice-merge visible or flatten-resize your tag, add credits, text,ect.. save an your done.
written by crazykittie
3/12/2011

Pinky Kitten



Supplies:
Tube- I used Keith Garvey you can purchase his artwork @ PTE
Mask- I used 245 from weescotlass
Kit- I used Kitty by Juicy bits



Ready?
Open a new 700x700 image, transparent
copy n paste paper of choice- apply mask-merge group
add noise- gausian/monochrome checked- 25%
copy n paste ribbon of choice (1-3), pull toward bottom right
of canvas-duplicate-mirror-flip
copy n paste one of the rectangle frames, rotate left 90
select inside the frame with magic wand-expand 4-invert
paste paper of choice- hit delete, move down-go back to frame
layer- paste close up of tube- resize slightly hit delete-move down
go back to frame layer- paste standing copy of tube- mirror- move
to the right- erase part of the one of the legs so it looks like she
is stepping into the frame.
open the wordart, using freehand tool draw around the wordart of your choosing, copy n paste- resize 80% using deform tool
rotate it to the left- an place at top left corner of your frame.
add any other elements of choice- merge all visible or flatten
resize tag, add credits,text,ect.. save an your done.
written by crazykittie
3/12/2011

Bluey



Supplies:
Tube- I used Myka Jelina
Kit- I used Blue Skys by Scrappin Daisy
Thank you Ruth for another fabulous creation!
Mask- I used 327 by weescotlass

Ready?
Open a new 700x700 image, transparent
copy n paste paper of choice, apply mask-merge group
adjust-blur-gausian 15%, add/remove noise- add noise- gausian/monochrome checked-30%
copy n paste element 9 or swirly of choice place to the left
of your canvas-duplicate-mirror-flip.
copy n paste frame of choice-select inside with magic wand
modify-expand 4-invert, copy n paste paper of choice-hit delete
move below frame, go back to frame layer-paste tube close up
when your happy hit delete selections none, move below frame layer-lower the opacity of this layer between 65-70.
paste your tube, resize if needed, add drop shadow of choice
paste ribbon of choice place toward bottom of frame over your tube use deform too to push the sides in so that it lines up with
the frame, go back to your tube an erase any parts showing below the ribbon.
copy n paste bow of choice resize by 77% 1x place at top left corner, rotate to the left slightly using deform tool.
copy n paste dragonfly or butterfly of choice, resize an place
over the bow.
copy n paste flower bundle of choice from the kit resize by 77%
place on bottom right corner, copy n paste butterfly of choice resize - mirror place over the flowers.
merge all visible-resize tag, add your credits,text ect.. save an your done.
written by crazykittie
3/11/2011

Friday, March 11, 2011

Lucky Be da Irish



Supplies:
Tube- I used Myriadelle
available for purchase @ My Tag Art
Kit- I used Irish Cream by Shal's world
also available for purchase @ mytagart.com
Mask- I used mask # 61 by weescotlass

Ready?
Open a new 700x700 image, transparent
copy n paste paper of choice-apply mask-merge group
duplicate-merge down.
copy n paste shamrock corner element move toward upper
left, duplicate-mirror-flip.
copy n paste swirly element, pull toward bottom left-duplicate-mirror-flip.
paste close up of your tube if you have one, copy n paste
2 flower clovers of choice resize by 70% 1x place 1st one
to bottom left of tube, see tag for placement.
do same for 2nd one, place it so it overlaps the first one a bit
merge down, dropshadow of choice, duplicate-mirror- merge down, duplicate-flip move the 2nd copy of clovers up an behind your tube, then pull them down a bit.
add any other elements of choice, merge visible or flatten,
resize- all layers checked by 70% add credits text, ect..
save an your done!
written by crazykittie
3/10/2011

Thursday, March 10, 2011

Cubby



Supplies:
Tube I used Myriadelle
available for purchase @ My Tag Art
Kit: I used New Beginnings by Sylvie Thank you sylvie for another
wonderful creation!

Ready?
Open a new 700x700 image, transparent
copy n paste frame that compliments your tube colors
resize 64% select inside both sides of the frame-expand 4-invert
paste paper of choice-hit delete move below frame-deselct
go back to frame layer select inside left side of frame-expand 4
invert- paste your tube resize if needed when your happy with it
hit delete move below frame deselect- repeat the last step for other side of frame.
choose 2 between elements 11-14 that compliment your tube
copy n paste- resize send to bottom place first one on right side
copy n paste 2nd element resize send to bottom mirror place
on left side.
copy n paste any other elements of choice- remember sharpen after scaling down, merge all visible, crop, resize to your liking
add credits,text, ect. save an your done.
written by crazykittie
3/9/2011

Wednesday, March 9, 2011

Charmed




Supplies:
Tube I used Melia Newman
Available for purchase @ My Tag Art
Kit: I used Charming by Jolene Here
supplied with permission, thank you jolene for another
fabulous creation.

Ready?
Open a new 700x700 image, transparent
paste frame-select all open areas with magic wand-expand 5
invert, paste paper of choice hit delete- move below frame
go back to frame layer- paste tube of choice, resize as needed
place where you want it, hit delete-deselect an move below frame.
paste doodle- place on left side-send to bottom-duplicate-mirror-flip.
paste hearts element, resize place at bottom left
paste heart string- resize place on left of frame.
paste flower of choice- resize an place at top of
hearts string.
paste tags element-resize place at top right, paste bow
of choice resize-place at top of tag string.
paste any other elements of choice- remember to sharpen
anything you scale down.
merge all visible, resize tag to 450x450 sharpen
add credits,text ect.. save an your done
written by crazykittie
3/9/2011

Girls Only




Supplies:
Tube-I used Zindy
Kit- I used Just Us Girls by polkdotscraps can be purchased @
pmtws
Mask- I used 342 from weescotlass

Ready?
Open a new 700x700 image
paste paper of choice-apply mask- merge group
add/remove noise-add noise- random/monochrome checked
@ 30%
paste element 7, copy n paste frame of choice
select inside the frame with magic wand- expand 5
paste paper of choice- hit delete- move down go back to frame layer
paste tube(s) of choice when your happy-hit delete-move down
deselect.
paste girls element, resize center at top of frame
paste element 15 resize place center of frame if using
same one. paste element 27, resize place at top of ribbon.
paste element 46 see tag for placement.
paste any other elements of choice-merge visible
resize tag to your liking, sharpen- add credits,text,ect..
save an your done.
written by crazykittie
3/9/2011

Rocker Girl




Supplies:
Tube- I used a poser from the kit
Kit- I used I Rock can be purchased @
pmtws
Mask- I used 77 & 115 from weescotlass

Ready?

Open a 700x700 new image transparent
paste paper of choice, apply mask 77-merge group
pull toward top left of canvas-duplicate-flip-mirror
paste another paper of choice, apply mask 115-merge group
paste frame of choice resize- select inside of frame w/magic wand- expand 4 invert paste paper of choice-delete
move below frame layer- go back to frame
paste tube-resize, when your happy with it, hit delete
move this below frame layer- deselect
paste handcuffs of choice-resize move to top left of frame
erase the part over the frame so it looks like they are hanging
from it.
paste skull element resize 80% place on left side of frame
paste microphone of choice resize place on left side of frame
move below skull chain.
paste record element resize an place at bottom left
paste rockstar element of choice resize an place on upper right
side of frame, paste heart element of choice-resize 30% 2x
place over staple on heart element.
add any other elements of choice, place to your liking.
merge all visible or flatten, resize tag to 448x448-sharpen
add credits,text, ect.. save an your done.
written by crazykittie
3/9/2011

Tuesday, March 8, 2011

So Loved







Supplies:
Tube- I used Zindy
Kit- I used Stefan by PDS can be purchased @ pmtws

Ready?
Open a new 600x600 image, transparent
copy n paste frame 2, grab magic wand and
select inside the frame-expand 4-invert
paste paper of choice- hit delete-move below frame
go back to frame layer paste your tube-hit delete
move below frame- deselect.
paste string 3 place at bottom for frame-
paste string 2 place at bottom.
paste ribbon 4 at top left corner-resize 70%
paste charm 1 resize 80% 2x if needed place
under the bow.
paste flower 2 resize place on right corner of frame.
paste butterfly from tube if using same one. place on
left bottom corner.
paste glow 1 element move toward top of canvas send to bottom
duplicate-mirror- flip. resize tag, add credits, text, ect.. save an your done.
written by crazykittie
3/8/2011

Butterflies





Supplies:
Tube: I used Holly Durr can be purchased @ My Tag Art
Kit: I used Moments by Jolene which I have supplied
with permission, Thanks Jo for another wonderful creation
Here
Mask: I used #80 from weescotslass


Got Everything?
Open a new 600x600 image, transparent
copy n paste the frame from the kit-image-rotate left 90
grab your magic wand select inside all open areas
modify-expand 4-invert paste paper of choice
hit delete-leave selected move paper below frame
go back to frame layer- paste your tube, resize an place
where you want it, hit delete move below frame-selections none
copy n paste another paper of choice- apply mask-merge group
send to bottom, place where you want it, duplicate-mirror-flip
copy n paste lace- resize 80% using deform tool move the
end inwards so they line up with the frame, move it down just a bit, duplicate- mirror
copy n paste flower chain-place on left side of the frame, move down under the frame an above the lace.
copy n paste bow charm- resize 80% place on right side of frame, see tag for placement.
copy n paste butterfly 2 place at bottom left corner, paste
butterfly 1 rotate left 25 or 30 place on bottom right.
add any other elements of choice, merge all visible
resize tag, sharpen. add credits text, ect.. save an your done
written by crazykittie
3/8/2011