Wednesday, September 7, 2011

Pixie Play Land



Supplies:
Kit: I used Wisteria by Polka Dot Scraps available for puchase @ PMWTS
Mask: I used #226 by Chelle
Do not use same ptu items i have unless you have purchased them an have a license to do so.
Ready? Open a new 650x650 image, paste paper of choice, apply mask-merge group.
open tree elment-grab your lasso tool, draw around one of the 2 trees, copy-paste onto your canvas, move to the left. paste element 30, place toward bottom of mask,
 paste element 24, resize, grab deform tool rotate till it is somewhat straight.
duplicate 3x's, and label these layers as leaves 1,2,3 & 4.
move layer 1 below the metal wire, move 2 up, 3 down an 4 up. paste the cottage, resize, place between leaves 1 and the wire.
paste element 28 resize, place in the center of the leaves. paste element 9, resize, rotate to the left slightly using the deform tool. place on right end of the leaves.
paste element 15, move it to the right an behind the leaves.
paste element 27 resize , move to the left an behind the cottage and in front of the tree. paste element 11, resize slightly an move down behind leaves an to the right.
paste bricks element an place in front of the mask an behind the mushrooms.
  paste pixies an resize each 1x by 50% (see tag for placement)
paste element 17, move to the upper left send to bottom, duplicate 2x's arrange, merge these 3 layers, an duplicate, move copy down about half way of the canvas. add any other elements of choice, merge, resize. add credits,text,etc.. save an your done! written by crazykittie 9/7/2011

Autum Love

Supplies:
Tube: I used art by Ariane Soares
Available for purchase @ My Tag Art
Kit: I used Autumn Love by Pimp'd Designs
available for purchase @ PMTWS
Mask: I used Mask#167 by Chelle
Do not use same items I have unless you have purchased them an have a
license to do so.

Ready?
Open a new 650 by 650 image, paste paper of choice, apply mask -merge group,
duplicate-mirror-flip, we will move them later.
paste frame of choice, select inside with magic wand- modify expand 4-invert.
paste paper, hit delete-move below frame, go back to frame, paste tube, hit delete
move down- selections none. merge paper,frame an tube layers-duplicate
on orginal copy, gaussian blur-radius 20. add noise gaussian, monochrome checked 61%
go to copy, resize by 80% 1x.
going back to your mask layers, move one copy to the left an up, move the other to the right an down.
paste tree, move down above mask layer an below frame, pull down just a little, ( see tag for placement)
paste green ribbon, resize slightly, place at top of frame.
paste pinecone, resize an place on left upper corner of frame.
paste lamppost, place on right side of frame.
paste the woodland element, place at bottom of frame, paste flower, resize, place to the bottom right.
paste any other elements of choice, merge, resize 1x by 80% add credits text etc.. save an your done!
written by crazykittie 9/7/2011


Tuesday, September 6, 2011

Pink Pixie

Supplies:
Tube: I used art by I use art by Gabriella Szabo
Available for purchase @ My Tag Art
Kit: I used My name is pixie by Schnegge
Mask: I used #93 by Chelle
Do not use same ptu items as i have unless you have purchased them an have a license to do so.

Ready?

Open a new 650x650 image, paste paper of choice-apply mask-merge group.
paste petals from the kit, resize by 85% place center of canvas
paste stars 1, place center of canvas.
paste starts 2, pull toward bottom left, duplicate-mirror-flip.
paste frame of choice, select inside with majic wand-modify-expand 4 invert
paste paper of choice, hit delete, move below frame layer.
go back to frame, paste tube, once happy with placement, hit delete.
move below frame layer.
add any other elements of choice, merge, resize.
add credits,text,etc... save an your done!
written by crazykittie 9/6/2011

Heavenly Love

Supplies:
I use art by Ariane Soares
Available for purchase @ My Tag Art
Kit: I used Heavenly by Kat
*Do not use same ptu items i have unless you have purchased them
and have a license to do so.*

Ready?

Open a new 650x650 image, copy n paste cloud from the kit, place to the left, duplicate-mirror.
paste element 21, resize place center of canvas.
paste element 11, resize an place center of e21, it will look like its propped if placed properly.
select inside the frame with your majic wand, modify-expand 6-invert.
paste paper of choice hit delete, move below frame layer.
go back to frame layer, paste tube, once happy with placement, hit delete-deselect.
move tube below frame layer.
paste element 02 resize an place at bottom of frame.
paste element 23 resize an place on right upper corner of frame.
paste element 14 resize an place on left side of frame, (see tag for placement)
add any other elements of choice, merge visible, resize.
add credits,text,etc. save an your done!!
written by crazykittie 9/3/2011

Monday, September 5, 2011

Bunny-Licious


Supplies:
Tube: I used Art by Keith Garvey, available for purchase @
Kit: I used elements from bunny collab kit by Pimp'd Designs & Sarah Bryan
available for purchase @ PMWTS
no outside filters or plugins used.
Do not use same ptu items i have unless you have purchased
them an have a license to do so.
Ready?
Open a new 650x650 image.
copy paste sb frame 1, resize 90% place center of your canvas.
grab your majic wand, select the inside of both circles of the frame.
selections-modify-expand 8 - invert.
paste paper of choice-delete, leave selected an go back to your frame layer.
paste close up of tube in first circle, when you have it where you want it, hit delete.
paste tube in 2nd circle an follow same steps as you did for first one.
selections none, move tube layers below frame an above paper layer.
go back to frame layer, paste sb charm 1, move to upper right corner of frame
add drop shadow of choice.
paste sb ribbon 1 move to bottom of frame (see tag for placement)
paste sb handcuffs resize an place on bottom right of ribbon, delete part of the
chain so its kinda hanging from the ribbon.
paste pd bag, resize an place on left side of ribbon (see tag for placement)
erase part of the chain so its hanging from the ribbon.
go back to frame layer paste pd sparkle over the frame, move to the right a little,
duplicate-mirror, move copy over to the left.
add any other elements of choice, merge, resize.
add credits,text,etc.. save an your done!!
written by crazykittie 9/3/2011

Saturday, September 3, 2011

Rockin' Emolicious


Supplies:
Tube: I used art by Celinart pinup available for purchase @ SATC
Kit: Emo rainbows by Tattoo freak available @
Mask: I used #262 by Chelle
Do not use same ptu items i have unless you have purchased them an have a license to do so.

Ready?
Open a new 650x650 image, paste paper of choice, apply mask-merge group.
add/remove noise-add noise- gaussian, monochrome checked @ 61%
paste 3 block frame, resize, image rotate left 90, grab magic wand an select inside each block,
modify expand 5 invert, paste paper hit delete move below frame layer, leave selected,
go back to frame layer paste tube, resize if needed, line up with center of frame
when your happy hit delete move below frame, deselect, go back to tube layer- lower the
opacity to around 65-70%.
paste element 35, resize-image mirror-place at top right corner of the frame.
paste element 5, resize, place at top of element 35.
copy n paste element 25, resize, place on right side of frame at bottom.
copy n paste tube of choice, resize, place on left side, duplicate an mirror
if you dont have 2 diff copies of tube.
paste element 9 from the kit, resize place at bottom left of canvas,
paste element 21 resize an place on the hand of element 9 so it looks
as if it's holding the glass.
add any other elments of choice, merge all visible or flatten, resize by 75%
add credits,text,etc... save an your done!
written by crazykittie 9/3/2011

Hot Kiss






Supplies:

Tube: I used Robert Alvarado his art is available for purchase @ PTE
Kit: I used Hot Kisses by Sarah available for purchase @
PMTWS
Mask: I used #51 by Chelle
Filters: DSB linear transmission
Do not use same ptu items i have unless you have purchased them and have
a license to do so.



Ready?

Open a new 650x650 image, paste paper of choice, apply mask-merge group
paste a 2nd paper of choice, apply mask-merge group. move one heart to upper left
an the other to the lower right.
paste 3 block frame, grab your majic wand, select inside each square, selections-modify-
expand 5-invert, paste paper of choice hit delete- selections none, move paper below frame layer. adjust-add remove noise- add noise- gaussian-monochrome checked-61%.
go to frame layer, select first box with magic wand-expand 5 invert, paste your tube,
when you have it where u want it, hit delete-selections none move below frame layer,
follow this same steps for the next 2 boxes, merge the 3 layers together, then apply
linear transmission with these settings: slice size 4, offset 3, blend -83 direction vertical.
making sure you are on the frame layer paste wire 2 resize an place at top of top left box.
paste the 3 kisses from the kit, place kiss 1at bottom left corner of top frame, kiss 2 at top right
of your canvas and kiss 3 at bottom right.
copy lipstick 1 resize, place at bottom left of your canvas, copy corset resize and place next to
lipstick 1, copy lipstick 2 resize image rotate-left 90 place at bottom right.
go back to kiss 3 layer an paste full size copy of your tube.
add any other elements of choice, merge visible, resize add credits, text, etc.. save and your done!!

written by crazykittie 9/3/2011

Thursday, September 1, 2011

All My Love


Supplies:
Tube I used Zindy Nielson
Kit: I used Into Forever by Pimp'd Designs available for purchase @ PMTWS
Mask: I used Mask#86 by Chelle
Do not use same items I have unless you have purchased them an have a license to do so.
*I used 75% on all resizing in this tut*
Ready?
Open a 650x650 new image paste paper of choice,
 layers-new mask layer-apply mask-merge group paste sparkles of choice from kit,
 place to your liking. paste frame of choice,
resize, select inside the frame with your magic wand expand 3,
invert- paste paper of choice hit delete- selections none
-move paper below frame layer. paste tube of choice,
once you have where you want it, erase or remove over hang using free hand selection.
copy n paste music sheet, resize-place on bottom right corner-see tag for placment,
 paste leaves element, resize place on right side of frame.
paste word art of choice, add any other elements of choice,
 once your happy merge all visible, resize, add credits, txt, etc..
save an your done.
written by crazykittie 9/1/2011